Cat 3516 Seattle Low

  • Specs Summary
  • Power Range
    775-1100 bhp (578-820 bkW)
  • Speed Range
    1200-1600 rpm
  • Emissions
    IMO II, EU IW
  • Aspiration
    TTA

3508C Propulsion Engine

The 3508C marine propulsion engine meets IMO II emissions regulation and delivers more power with lower emissions for your marine propulsion needs. Additionally, the 3508C provides outstanding fuel efficiency and lube oil consumption. Standard or reverse rotation options are available as well as worldwide parts and service. The 3500 engine platform is a streamlined and proven design that provides industry-leading reliability & durability.

Power Rating

  • Power Range 775-1100 bhp (578-820 bkW)

Engine Specifications

  • Speed Range 1200-1600 rpm
  • Emissions IMO II, EU IW
  • Aspiration TTA
  • Bore 6.7 in (170 mm)
  • Stroke 7.5 in (190 mm)
  • Displacement 2107 in3 (34.5 L)
  • Rotation (from flywheel end) Counterclockwise or Clockwise
  • Configuration Vee 8, 4-Stroke-Cycle Diesel

Dimensions & Weights

  • Minimum Dry Weight 10935 lb (4960 kg)
  • Maximum Length 83.4 in (2117 mm)
  • Maximum Height 72 in (1829 mm)
  • Minimum Width 67 in (1703 mm)

Standard Equipment

Fuel System

  • Fuel filter, RH, with service indicators.
  • Fuel transfer pump.
  • Electronically controlled init injectors

Instrumentation

  • Graphical Unit (Marine Power Display) for analog or digital display of

Lube System

  • Crankcase breather, Top mounted
  • Oil filter, RH, with service indicators
  • Oil filler and dipstick, RH
  • Standard sump oil pan (500 Hour oil change interval)
  • Oil pump, gear type

Mounting System

  • Rails, engine mounting, ledge type, 203 mm x 203 mm (8 in x 8 in)

Power Takeoffs

  • Accessory drive
  • Front housing, two-sided

Protection System

  • A4 ECU Electronic Monitoring System provides customer programmable engine de-rate strategies to protect against adverse operating conditions

General

  • Vibration damper and guard
  • Lifting eyes
  • Paint, Caterpillar Yellow engine with black rails
  • NOTE: Engines for heat exchanger cooling do NOT include heat exchanger.

Flywheel and Flywheel Housing

  • Flywheel, SAE No. 0, 151 teeth.
  • Flywheel housing, SAE No. 0.

Air Inlet System

  • Separate circuit aftercooler core, corrosion resistant coated (air side)
  • Air cleaner, regular duty
  • Dual turbochargers, 152 mm (6 in) OD straight connection

Control System

  • Dual Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
  • Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)

Cooling System

  • Oil cooler
  • Thermostats and housing, Full open temperature 92 C (198 F)
  • Jacket water pump, gear driven, centrifugal
  • Auxiliary fresh water pump with SCAC engines
  • Auxiliary sea water pump, Centrifugal, Non-self-priming
  • Expansion tank

Exhaust System

  • Dry gas tight exhaust manifolds with heat shields.
  • Dual turbochargers with watercooled bearings and heat shield.
  • Exhaust outlet, vertical, 203 mm (8 in) round flanged.

Protection System

  • AIII Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
  • Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:

Optional Equipment

Charging System

  • Battery Charger, 10 amp
  • Charging Alternators

Cooling System

  • Water Level Switch Gauge
  • Coolant Level Sensors
  • Connections
  • Keel Cooling Conversions
  • Heat Exchangers
  • Auxiliary Water Pumps
  • Sea Water Pump Removal
  • Coolant Shunt Tanks
  • Air Separator
  • Marine Gear Cooling

Instrumentation

  • PL1000T Communication Module
  • Customer Interface
  • Thermocouples
  • Remote Panel Display
  • Remote Cylinder Temperature Display
  • Pilot House Instrument Panels
  • Marine Gear Sensors
  • Engine Vision Display System

Mounting System

  • Engine Supports
  • Vibration Isolators

Power Take-Offs

  • Front Housing Accessories
  • Flexible Coupling and Guards
  • Upper Left Hand Front Location:
  • Upper Right Hand Front Location:
  • Upper Right Hand Rear Location:
  • Lower Left Hand Front Location:
  • Lower Left Hand Rear Location:
  • Front Housing Accessory Drives
  • Upper LH Accessory Drive
  • Upper RH Accessory Drive
  • Front Power Take Offs
  • Crankshaft Pulleys
  • Damper Guard Removals

Air Inlet System

  • Remote Air Inlet Adapters

Control System

  • Throttle Position Sensor
  • Throttle Position Signal Conv.
  • Throttle Position Sensor Removal
  • Local Speed Throttle Control
  • Throttle Synchronization

Exhaust System

  • Exhaust Outlet
  • Flexible Fittings
  • Elbows
  • Flanges
  • Flange and Exhaust Expanders
  • Mufflers

Lube System

  • Oil Pan
  • Oil Pan Accessories
  • Sump Pumps
  • Lubricating Oil

Protection System

  • Air Inlet Shutoffs
  • Switches and Contactors
  • Explosion Relief Valve
  • Sensors

Special Appearance

  • Special Appearance Packages with Chrome Covers
  • Chrome Plated Relief Valves
  • Black Air Cleaners
  • Yacht Class Finish

Starting System

  • Starting Motors or Barring Device
  • Air Starting Motor Options:
  • Starting Aids
  • Battery Sets - 24 Volt - Dry
  • Battery rack

General

  • Tool set
  • Caterpillar datalink wire

Packing

  • Shrink Wrap Protection
  • Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
  • Storage Preservation with Vapor Corrosion Inhibitor
  • Export Packaging