336 Excavator

  • Specs Summary
  • Gross Power
    74.8 hp (55 kW)
  • Standard Paving Range
    1.75-3.42 m (5' 9" - 11' 2")
  • Operating Weight
    18850 lb (8550 kg)
  • Net Power (ISO 9249)

AP355F Paver

High Efficiency Powertrain

Advanced Eco-Mode

Advanced Eco-mode modifies engine speed to save fuel and reduce sound levels, leading to lower operating costs and better work site communication.

More Traction

The Mobil-Trac Undercarriage combines the speed of a wheel paver with the traction and flotation of a track paver. This system is equipped with oscillating bogie sets that help the Mobil-trac maintain contact with the surface regardless of irregularities. Grade deviations and and tow point movement are minimized due to the smooth motion of these bogie sets, resulting in smoother paving results. This system is also maintenance-free. Rubber coated components shed asphalt shed asphalt and prevent accumlation, while self-tensioning accumulators, center guide blocks, and internal belt cables ensure reliability.

Responsive Steering and Travel Options

Three steering/travel modes provide alternative control options for paving, traveling, and maneuvering around the job site. Pave mode enables a paving speed up to 64 mpm (210 fpm), while travel mode offers a quick speed of 11 kph (7 mph). Maneuver mode offers tight turning capability for easier positioning in compact areas.

Automation Enhances Material Flow

Advanced Hopper Control

Advanced hopper controls enhance operator efficiency by allowing more focus to be on the work site. The advanced control activates the hopper fold or retract function with a single touch. The operator doesn't have to press the switch through the entire travel cycle.

Cleanout and Warm-Up Mode

Simple preparation and cleaning can save time. The cleanout and warm-up mode activates the augers, conveyors, and tamper bars (if equipped) at slow speed enabling for the application of inhibitors that help prevent material build-up.

Consistent Starting

Consistent paving starts can lead to smoother pavement. At the beginning of each pass, the auto-fill material feed system activates the augers and conveyors and moves material across the face of the screed until the material reaches the set points of the feed sensors. This consistency allows the operators to quickly fine tune the feeder system speeds for smooth material flow in front of the screed.

Simple Activation

Technology enhancements optimize operator performance. The material feed system can be activated with a single switch for quick setup. Each auger and each conveyor can also be activated individually in manual or automatic mode when certain conditions exist.

Comfort and Visibility

Water Resistant Consoles

Providing reliable machine control in inclement weather can be a challenge. The water resistant consoles provide excellent reliability and meet IP67 common water submergence ratings. The switches have been tested to one million cycles without failure. If a failure does occur, grouped components are serviceable and it's not necessary to replace the entire console.

Easy Recognition and Interactive Displays

Easy recognition and reliable controls help operators perform more efficiently. The raised switch design and adjustable brightness controls simplify nighttime operation, while the touch screen LCD displays allow for customization. Also, multiple language options and large symbols accomodate crew diversity.

Application Versatility

Fast Heating Screeds

The electric heat control panel utilizes touch-pad technology and LED indicator lights to create a user-friendly interface. Three pre-set temperature settings for each screed section ensure even-heat distribution and manual adjustments provide override capability. On-board diagnostics enable the operator to verify fault indicators.

Tamper Bar Screed

The SE34 VT combines vibratory screed plates and tamper bars to optimize density behind the screed. Variable speed settings for tamping speed and vibratory speed help fine tune the system to maximize mat quality.

Simplified Service

Quick-Change Heating Elements

The screed plate heating elements easily slide out for fast replacement in the event that a failure occurs.

Temperature Sensor Monitoring

The technologically advanced monitoring system automatically keeps the screed plates heating if a temperature sensor fails.

Weights

  • Operating Weight 18850 lb (8550 kg)

Operating Specifications

  • Standard Paving Range 1.75-3.42 m (5' 9" - 11' 2")

Engine

  • Gross Power 74.8 hp (55 kW)

Drive System

Service Refill Capacities

Hopper

Dimensions

Standard Equipment

Optional Equipment