Oil And Gas

  • Specs Summary
  • Minimum Rating
    385 bhp (287 bkW)
  • Maximum Rating
    520 bhp (387 bkW)
  • Emissions
    EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
  • Length
    47.3 in. (1201 mm)

C13 ACERT™ Dry Manifold Petroleum Engine

Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.

General Specifications

  • Minimum Rating 385 bhp (287 bkW)
  • Maximum Rating 520 bhp (387 bkW)
  • Governor and Protection Electronic (ADEM™ A3)
  • RPM 2100 RPM (2100 RPM)
  • Aspiration Turbocharged-Aftercooled
  • Displacement 760 in3 (12.5 L)
  • Flywheel and Flywheel Housing SAE 1
  • Flywheel Teeth 113
  • Rotation (from flywheel end) Counterclockwise
  • Stroke 6.2 in. (157 mm)
  • Bore 5.1 in (130 mm)

Emissions

  • Emissions EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA

Dimensions

  • Length 47.3 in. (1201 mm)
  • Width 39.9 in. (1013 mm)
  • Height 46.7 in. (1186 mm)
  • Weight 1976 lb (896 kg)

Capacity for Liquids

  • Lube Oil System (refill) 9 gal (34 L)
  • Cooling System 3.8 gal (14.4 L)

Standard Equipment

Air Inlet System

  • Turbocharger, mid-mounted
  • Air inlet elbow 90°, 104.5 mm (4.11" OD) hose connection

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Engine monitoring system — speed, temperature, pressure
  • J1939 Broadcast — diagnostic and engine status

Cooling System

  • Thermostats and housing
  • Jacket water pump — gear-driven
  • Front water pump inlet

Exhaust System

  • Exhaust manifold — dry
  • Front turbo exhaust

Flywheels and Flywheel Housings

  • See Mandatory Options

Fuel System

  • Electronic unit injector
  • Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
  • Fuel transfer pump — front
  • Fuel priming pump — LH mid-mount
  • Fuel fitting — fuel return connection: straight No. 8, 5/8-18

Lube System

  • Crankcase breather
  • Oil cooler
  • Oil filter — RH
  • Oil pan — front sump, 40 L capacity
  • Oil filler — LH front
  • Oil dipstick — LH front
  • Oil pump
  • Oil valve sampling — RH rear engine side

Power Take-Offs

  • Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
  • Hydraulic pump drive — SAE A, 11-tooth
  • 1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)

General

  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit (connectors, pins, sockets)
  • Literature

Mandatory Options

  • Flywheel housing or rear PTO
  • Throttle position sensor
  • Primary filter/water separator

Optional Equipment

Air Compressor

  • Air compressors
  • Air chambers
  • Air compressor governors

Air Inlet System

  • Air cleaners
  • Precleaners
  • Air lines
  • Air inlet gasket

Belt-Driven Accessories

  • Refrigerant compressor and mounting

Charging System

  • Charging alternators
  • Alternator mountings
  • Alternator guard
  • Alternator accessories

Control System

  • Connection

Cooling System

  • Radiator — installed
  • Fan drive f/u/w Caterpillar installed radiator
  • Fan drive pulleys f/u/w customer-supplied radiators
  • Coolant conditioner
  • Water lines — pump inlet
  • Fan drive mountings
  • Fan height instructions
  • Fan adapters for suction fans and blower fans
  • Suction fans and blower fans
  • Coolant level sensor
  • Aftercooler lines

Exhaust System

  • Muffler
  • Flexible fitting
  • Elbows, flange, pipe, clamp
  • Straight exhaust adapter

Fuel System

  • Fuel lines for fuel filter
  • Fuel cooler
  • Fuel fitting — fuel return connection
  • Flexible fuel lines

Instrumentation

  • Gauges and instrument panels
  • Voltmeters
  • Gauge mounting
  • Ammeter

Lube System

  • Oil pan
  • Oil pan drain
  • Oil level gauges
  • Oil filter — bypass and remote
  • Lubricating oil
  • Oil filler
  • Fumes disposal

Mounting System

  • Front and rear engine supports
  • Structural steel base

Power Take-Offs

  • Crankshaft pulleys
  • Crankshaft pulley — stack-on
  • Output flange
  • Flywheel stub shaft
  • Front stub shaft
  • Hydraulic pump drive
  • Hydraulic pumps — front and rear
  • Enclosed clutch
  • Clutch support

Protection System

  • Air shutoff
  • Air shutoff switch

Starting System

  • Starting System
  • Starting aids
  • Battery sets — 24 Volt, dry
  • Battery cable
  • Battery rack

Transmission Arrangement

  • Transmission cooler