Oil And Gas

  • Specs Summary
  • Minimum Rating
    755 bhp (563 bkW)
  • Maximum Rating
    800 bhp (597 bkW)
  • Emissions
    U.S. EPA Non-road Tier 4 Final
  • Rated Speed
    1800 RPM (1800 RPM)

C18 ACERT Tier 4 Final

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C18 ACERT Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.

Engine Specifications

  • Minimum Rating 755 bhp (563 bkW)
  • Maximum Rating 800 bhp (597 bkW)
  • Emissions U.S. EPA Non-road Tier 4 Final
  • Rated Speed 1800 RPM (1800 RPM)
  • Bore 5.7 in (145 mm)
  • Stroke 7.2 in (183 mm)
  • Displacement 1104 in3 (18.1 L)
  • Aspiration Turbocharged-Aftercooled
  • Governor and Protection ADEM A4
  • Engine Weight, net dry 3482 lb (1580 kg)
  • Oil Change Interval 250 - 500
  • Rotation (from flywheel end) Counterclockwise
  • Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1
  • Flywheel Teeth 136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

  • Minimum Cooling System (engine only) 7.1 gal (26.9 L)

Dimensions

  • Length 60.2 in (1530 mm)
  • Width 37.8 in (961 mm)
  • Height 50.5 in (1282 mm)

Standard Equipment

Air Inlet System

  • Turbocharged Aftercooled

Control System

  • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control

Cooling System

  • Vertical outlet thermostat housing, centrifugal water pump

Exhaust System

  • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)

Flywheels and Flywheel Housing

  • SAE 0 and SAE 1 flywheel housing

Fuel System

  • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming

Lube System

  • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)

Power Take Off

  • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications

General

  • Paint: Cat yellow; vibration damper; lifting eyes

Optional Equipment