Oil And Gas

  • Specs Summary
  • Minimum Rating
    205 bhp (153 bkW)
  • Maximum Rating
    275 bhp (205 bkW)
  • Emissions
    EPA & CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
  • Length
    4.38 in. (1113 mm)

C7 ACERT™ Hazardous Location Engine

Cat C7 ACERT hazardous location engines are the ideal solution for specialized and demanding operations in the oilfield. Engines are hazardous-location certified from the factory to minimize installation design, time, and cost. Decades of field operation and intense research and development allow Cat C7 ACERT hazardous location engines to deliver excellent performance with low operating costs and emissions. Hazardous location engines are certified to operate in potentially explosive environments. Applications powered by C7 ACERT engines include pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C7 ACERT hazardous location engines, with ratings 153-172 bkW (205-230 bhp) @ 2200 rpm meet IMO Tier II, U.S. EPA Marine Tier 3, EPA Non-road Tier 3 equivalent and EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

General Specifications

  • Minimum Rating 205 bhp (153 bkW)
  • Maximum Rating 275 bhp (205 bkW)
  • Governor and Protection Electronic ADEM™ A4
  • Aspiration Turbocharged-Aftercooled
  • Displacement 442 in3 (7.2 L)
  • Flywheel and Flywheel Housing SAE 1,2, or 3
  • Flywheel Teeth 156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
  • Rotation (from flywheel end) Counterclockwise
  • Stroke 5 in. (127 mm)
  • Bore 4.3 in (110 mm)

Emissions

  • Emissions EPA & CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II

Dimensions

  • Length 4.38 in. (1113 mm)
  • Width 33.5 in. (851 mm)
  • Height 43.8 in. (1113 mm)
  • Weight 1570 lb (712 kg)

Capacity for Liquids

  • Lube Oil System (refill) 36 gal (34 L)
  • Cooling System 78.2 gal (74 L)

Standard Equipment

Air Inlet System

  • Turbocharger, separate circuit (SCAC) or remote (REMAC) aftercooler
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Air inlet, RH side, rear facing, 101.6 mm (4 in.) connection type

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Fuel cooled ECU
  • Power compensation for fuel temperature
  • Programmable low and high idle
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speed, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Certified electrical control system
  • Derated engine: automatic ambient temperature compensation

Cooling System

  • Thermostats and housing, front-facing outlet — 51 mm (2.01 in) connection
  • Jacket water pump — belt-driven, centrifugal
  • Water pump — inlet RH front vertical inlet (pointing down) — 63 mm (2.48 in)

Exhaust System

  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Exhaust manifold — water-cooled
  • Front turbo exhaust

Flywheels and Flywheel Housing

  • Mandatory selection of: SAE No. 1, SAE No. 2, or SAE No. 3 flywheel and housing SAE standard rotation

Fuel System

  • HEUI fuel system
  • Fuel filter — secondary, LH front (2-micron high performance)
  • Fuel transfer pump — left front
  • Fuel priming pump — left front

Lube System

  • Crankcase breather — top rear
  • Crankcase fumes disposal — RH
  • Oil cooler — RH
  • Oil filter — RH
  • Oil pan — front sump, 31 L (33 qt) oil change capacity
  • Oil filler — front top valve cover
  • Oil level gauge — LH rear
  • Engine oil pump — gear-driven
  • Oil valve sampling, RH

Power Take-Offs

  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide

General

  • Vibration damper
  • Lifting eyes
  • Literature
  • No paint

Mandatory Options

  • Flywheel housing and flywheel
  • Primary filter/water separator
  • Turbo orientation

Optional Equipment

Air Compressors

  • Air compressor governor

Air Inlet System

  • Precleaner
  • Air inlet elbow
  • Charging System
  • Cooling System

Emissions Certifications

  • IMO certification

Flywheels and Flywheel Housing

  • Crankshaft seal

Instrumentation

  • Gauges and instrument panels

Lube System

  • Oil pans
  • Drain and cover
  • Remote oil filters
  • Lubricating oils

Mounting System

  • Structural steel base
  • Engine support — front and rear

Power Take-Offs

  • Rear enclosed clutches
  • Hydraulic pump drives
  • Crankshaft pulleys

General

  • Tool set