Industrial Oem

  • Specs Summary
  • Minimum Rating
    32.5 bhp (24.2 bkW)
  • Maximum Rating
    32.5 bhp (24.2 bkW)
  • Emissions
    U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent
  • Frequency
    3000 rpm

Cat® C1.5 Industrial Power Unit

The Cat® C1.5 Industrial Power Unit is offered in the following rating: 24.2 bkW (32.5 bhp) @ 3000 rpm. This rating meets U.S. EPA Tier 4 Interim equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

  • Minimum Rating 32.5 bhp (24.2 bkW)
  • Maximum Rating 32.5 bhp (24.2 bkW)
  • Frequency 3000 rpm

Emission Standards

  • Emissions U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent

General

  • Engine Configuration Inline 3, 4-Stroke-Cycle Diesel
  • Bore 84 mm (3.3 in)
  • Stroke 90 mm (3.5 in)
  • Displacement 1.496 L (91 in³)
  • Aspiration Naturally Aspirated (NA)
  • Compression Ratio 22.5:1
  • Rotation (from flywheel end) Counterclockwise
  • Cooling System Capacity 5.98 L (6.3 qt)
  • Lube System (refill) 6 L (6.3 qt)

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 820 mm (32.3 in)
  • Width 497 mm (19.6 in)
  • Height 793 mm (31.2 in)
  • Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 175 kg (385.8 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Inlet manifold

Control System

  • Alternator 12 volt 65 amp
  • Starter motor 12 volt
  • Glow plug starting aid
  • Tier 4 Final: Alternator 12V 85 amp

Cooling System

  • Belt-driven coolant pump
  • Coolant temperature switch
  • Mounted air cleaner
  • Mounted radiator and fan

Flywheel & Flywheel Housing

  • Naturally Aspirated: SAE No. 7 1/2 flywheel
  • Choice of SAE No. 4, SAE No. 5 or standard backplate flywheel housing

Fuel System

  • Fuel injection pump
  • Fuel filter
  • Electronic Shut-off Solenoid (ESOS)

Lube System

  • Spin-on lube oil filter
  • Lube oil pressure switch
  • Lube oil sump

Power Take Off (PTO)

  • Provision for timing case rear facing PTO

General

  • Cast iron, engine block
  • Cast iron exhaust manifold--side outlet
  • Cold start capability to -20° C (-4° F)
  • Gradeability 35° continuous
  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment