Industrial Oem

  • Specs Summary
  • Minimum Rating
    225 bhp (168 bkW)
  • Maximum Rating
    275 bhp (205 bkW)
  • Emissions
    China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
  • Frequency
    2200 rpm

Cat® C7 ACERT™ Industrial Power Unit

The Cat® C7 ACERT™ Industrial Power Unit is offered in ratings ranging from 168-205 bkW (225-275 bhp) @ 1800-2200 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

  • Minimum Rating 225 bhp (168 bkW)
  • Maximum Rating 275 bhp (205 bkW)
  • Frequency 2200 rpm

Emission Standards

  • Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Bore 110 mm (4.33 in)
  • Stroke 127 mm (5.0 in)
  • Displacement 7.2 L (442 in³)
  • Aspiration Turbocharged Aftercooled (TA)
  • Compression Ratio 17:1
  • Rotation (from flywheel end) Counterclockwise

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 2029.5 mm (79.9 in)
  • Width 974.8 mm (38.4 in)
  • Height 1986.3 mm (78.2 in)
  • Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 1250 kg (2756 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and total engine limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system SAE J1939 broadcast and control
  • ADEM™ A4 Electronic Control Unit (ECU)

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Water pump, inlet

Exhaust System

  • Exhaust manifold, dry
  • Optional exhaust outlet

Flywheels and Flywheel Housing

  • SAE No. 1 flywheel housing

Fuel System

  • HEUI™ injection
  • Fuel filter, secondary (2 micron)
  • ACERT™ Technology
  • Fuel transfer pump
  • Fuel priming pump

Lube System

  • Crankcase breather
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Front sump oil pan
  • Oil dipstick
  • Gear driven oil pump

General

  • Vibration damper
  • Lifting eyes
  • Cold start capability to -20° C (-4° F)
  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment