Industrial Oem

  • Specs Summary
  • Minimum Power
    2100 bhp (1506 bkW)
  • Maximum Power
    2100 bhp (1506 bkW)
  • Emissions
    U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
  • Frequency
    1750 rpm

Cat® 3516C Industrial Diesel Engine

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Power Rating

  • Minimum Power 2100 bhp (1506 bkW)
  • Maximum Power 2100 bhp (1506 bkW)
  • Frequency 1750 rpm

Emission Standards

  • Emissions U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

General

  • Engine Configuration V-16, 4-Stroke-Cycle Diesel
  • Bore 170 mm (6.7 in)
  • Stroke 215 mm (8.5 in)
  • Displacement 78 L (4760 in³)
  • Aspiration Turbocharged Aftercooled
  • Compression Ratio 14.7:1
  • Rotation (from flywheel end) Counterclockwise
  • Lube System (refill) 807 L (852 qt)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 3278 mm (129.1 in)
  • Width 1530 mm (60.2 in)
  • Height 2062 mm (81.2 in)
  • Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 7840 kg (17284 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Air to Air Aftercooled (ATAAC)
  • Four turbochargers, center mounted

Control System

  • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)

Cooling System

  • Thermostats and housing
  • Gear driven centrifugal jacket water pump
  • Connections for radiator cooling

Exhaust System

  • Exhaust manifold, dry
  • Four turbochargers with watercooled bearings
  • Two exhaust outlets, 203 mm (8 in) round flange

Flywheels and Flywheel Housing

  • SAE No. 00 flywheel (183 teeth)
  • SAE No. 00 flywheel housing

Fuel System

  • Fuel filter, LH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors

Instrumentation

  • No standard instrument or gauge panel

Lube System

  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler and dipstick, LH
  • Oil pump
  • Oil filter, LH, spin-on type
  • Front sump oil pan, 500-hour change interval

Mounting System

  • Trunnion front support

Power Take Off

  • Front housing, two-sided

Protection System

  • ADEM A4 ECM monitoring system to provide customer programmable engine
  • Deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40 pin customer interface connection

Starting System

  • Dual 24V electric starting motor, LH, unwired

General

  • Paint: Caterpillar yellow
  • Vibration damper
  • Lifting eyes

Optional Equipment