Industrial Oem

  • Specs Summary
  • Minimum Rating
    173.7 bhp (129.5 bkW)
  • Maximum Rating
    225 bhp (168 bkW)
  • Emissions
    U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
  • Frequency
    2200 rpm

Cat® C6.6 ACERT™ Industrial Power Unit

The Cat® C6.6 ACERT™ Industrial Power Unit is offered in ratings ranging from 129.5-168 bkW (173.7-225.3 bhp) @ 1800-2500 rpm. These ratings meet U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

  • Minimum Rating 173.7 bhp (129.5 bkW)
  • Maximum Rating 225 bhp (168 bkW)
  • Frequency 2200 rpm

Emission Standards

  • Emissions U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Bore 105 mm (4.1 in)
  • Stroke 127 mm (5.0 in)
  • Displacement 6.6 L (402.8 in³)
  • Aspiration Turbocharged Aftercooled (TA)
  • Compression Ratio 16.2:1
  • Combustion System Direct Injection
  • Rotation (from flywheel end) Counterclockwise

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 1708 mm (67.23 in)
  • Width 767 mm (30.2 in)
  • Height 1144 mm (45 in)
  • Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 709 kg (1563 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Mounted air filter and turbocharger

Control System

  • Alternator 12 volt 14 amp
  • Starter motor 12 volt
  • Glow plug starting aid

Cooling System

  • Fan (pusher or puller)
  • Fan drive
  • Radiator
  • Water pump

Flywheels and Flywheel Housing

  • Choice of SAE No. 2 or SAE No. 3 flywheel housing

Fuel System

  • Electronic high pressure common rail
  • ACERT™ Technology
  • Innovative filter design to ensure maximum protection of the engine

Lube System

  • Oil cooler
  • Lube oil filter
  • Timing case oil filler

Power Take Off (PTO)

  • SAE A or SAE B front PTO (142/280 NŸM)

General

  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment