Industrial Oem

  • Specs Summary
  • Minimum Power
    225 bhp (168 bkW)
  • Maximum Power
    300 bhp (224 bkW)
  • Emissions
    China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
  • Frequency
    1800-2200 rpm

Cat® C7 ACERT™ Industrial Diesel Engine

Demanding conditions, applications and environments make Cat® C7 ACERT™ Industrial Diesel Engines the perfect solution for your severe duty equipment. With decades of diesel engine innovation and expertise behind these engines, they deliver the low operating costs and legendary Cat reliability and durability that give you a powerful advantage. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat industrial engine. Industries and applications powered by C7 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers and Underground Mining Equipment. The C7 ACERT engines, with ratings: 168-224 bkW (225-300 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Power Rating

  • Minimum Power 225 bhp (168 bkW)
  • Maximum Power 300 bhp (224 bkW)
  • Frequency 1800-2200 rpm

Emission Standards

  • Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent

General

  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Bore 110 mm (4.33 in)
  • Stroke 127 mm (5.0 in)
  • Displacement 7.2 L (442 in³)
  • Aspiration Turbocharged Aftercooled (TA)
  • Compression Ratio 16.2:1
  • Combustion System Direct Injection
  • Rotation (from flywheel end) Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 1053 mm (41.5 in)
  • Width 758 mm (29.8 in)
  • Height 1032 mm (40.6 in)
  • Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 588 kg (1296 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and total engine limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system SAE J1939 broadcast and control
  • ADEM™ A4 Electronic Control Unit (ECU)

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Water pump, inlet

Exhaust System

  • Exhaust manifold, dry
  • Optional exhaust outlet

Flywheels and Flywheel Housing

  • SAE No. 1 flywheel housing

Fuel System

  • HEUI™ injection
  • Fuel filter, secondary (2 micron)
  • ACERT™ Technology
  • Fuel transfer pump
  • Fuel priming pump

Lube System

  • Crankcase breather
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Front sump oil pan
  • Oil dipstick
  • Gear driven oil pump

General

  • Vibration damper
  • Lifting eyes
  • Cold start capability to -20° C (-4° F)
  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment