Specifications
Engine
- Net Power - ISO 9249/SAE J1349
- 130hp
- Standard Capability
- 122°F
- Number of Cylinders
- 6
- Derating Altitude (AWD)
- 5499ft
- Torque Rise - ISO 9294
- 42%
- Note (2)
- Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Displacement
- 427.8in³
- Derating Altitude
- 9842.5ft
- Maximum Torque - ISO 9249
- 606lb/ft
- Net Power Range (Tier 3)
- 130hp
- Note (3)
- Power as declared per ISO 14396
- Bore
- 4.1in
- Engine RPM
- 2,000
- Maximum Torque - AWD On
- 611lb/ft
- Note (1)
- Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
- Engine Model
- Cat 7.1
- Stroke
- 5.3in
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
- All-Wheel Drive Net Power Range (Tier 4)
- 174kW
Weights
- Operating Weight - Typically Equipped
- 35067lb
Moldboard
- Blade Width
- 12ft
- End Bit
- 6in
- Cutting Edge
- 6in
- Blade Height
- 24in
- Throat Clearance
- 4.1in
- Arc Radius
- 16.3in
Service Refill Capacities
- Fuel Tank
- 65gal (US)
- Engine Crankcase
- 4.8gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Only)
- 5gal (US)
- Hydraulic System
- 25.6gal (US)
- Transmission and Differential
- 9gal (US)
- Circle Drive
- 1.8gal (US)
- Cooling System
- 14gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
Machine Weight
- Lever/Steering Wheel Weight* Tier 4
- 35067lb
- Joystick All-Wheel Drive (AWD) Weight* Tier 4
- 36846lb
- Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4
- 36731lb
- Note (1)
- *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
- Joystick Weight* Tier 4
- 35358lb
Blade Range
- Maximum Depth of Cut
- 30.5in
- Moldboard Side Shift Left
- 20.1in
- Circle Center Shift Left
- 26in
- Blade Tip Range Backward
- 5
- Maximum Lift Above Ground
- 16.1in
- Circle Center Shift Right
- 26in
- Blade Tip Range Forward
- 40
- Maximum Shoulder Reach Right
- 76in
- Moldboard Side Shift Right
- 26.1in
- Maximum Shoulder Reach Left
- 69.4in
Dimensions
- Length of Machine*
- 387in
- Width All Wheel Drive (AWD)
- 2551mm
- Width
- 102in
- Note
- *Typically equipped with push block and ripper.
- Maximum Height
- 136.4in
- Basic Blade Width
- 12ft
