Specifications
Engine
- Gross Power - SAE J1995
- 67.1hp
- Net Power - SAE 1349
- 65.8hp
- Displacement
- 134.3in³
- Stroke
- 3.9in
- Bore
- 3.3in
- Peak Torque - 1,500 rpm - SAE J1995
- 153ft·lbf
- Net Flywheel Power
- 65.8hp
- Net Power - ISO 9249
- 66.5hp
- Engine Model
- Cat C2.2 CRDI
Operating Specifications
- Rated Operating Capacity
- 1900lb
- Tipping Load
- 3800lb
- Breakout Force - Tilt Cylinder
- 3928lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
- Rated Operating Capacity with Optional Counterweight
- 2000lb
Weights
- Operating Weight
- 6514lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Dimensions
- Wheel Base
- 41.5in
- Height - Top of Cab
- 79.9in
- Vehicle Width over Tires
- 58.9in
- Ground Clearance
- 6.7in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 47.4°
- Length - Without Bucket
- 99.3in
- Clearance at Maximum Lift and Dump
- 88.7in
- Bucket Pin Reach - Maximum Lift
- 8.8in
- Maximum Overall Height
- 150.9in
- Turning Radius from Center - Machine Rear
- 59.6in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
- Bucket Pin Height - Carry Position
- 8.4in
- Length - With Bucket on Ground
- 127.3in
- Bumper Overhang - Behind Rear Axle
- 35.2in
- Turning Radius from Center - Bucket
- 77.8in
- Maximum Reach - With Arms Parallel to Ground
- 49.2in
- Bucket Pin Height - Maximum Lift
- 118.1in
- Reach - Maximum Lift/Dump
- 25.7in
- Rack Back Angle - Maximum Height
- 88.2°
- Turning Radius from Center - Coupler
- 43.4in
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Cooling System
- 3.2gal (US)
- Engine Crankcase
- 2.6gal (US)
- Fuel Tank
- 15.1gal (US)
- Hydraulic System
- 11.9gal (US)
- Hydraulic Tank
- 9gal (US)
- Chain Box - Each Side
- 1.8gal (US)
Hydraulic System
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26gal/min
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 35.5hp
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18gal/min
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3336psi
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 50.9hp
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 7.6mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11.1mile/h
Noise Level
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Inside Cab*
- 83 dB(A)
- Outside Cab**
- 101 dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.