Specifications
Engine
- Engine Model
- Cat® C15
- Engine Power - Tier 3 Engine - ISO 14396:2002
- 401hp
- Engine Power - VR Engine - ISO 14396:2002
- 401hp
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 927.6in³
- Note (1)
- Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
- Note (2)
- All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica
- Note (3)
- No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.
- Note (4)
- Optional Ventilation Reduction package available.
- Note (5)
- Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Operating Specifications
- Nominal Payload Capacity
- 44092lb
- Gross Machine Mass
- 180779lb
- Static Tipping Load - Straight Ahead - Lift Arms Horizontal
- 104199lb
- Static Tipping Full Turn Ahead Lift Arms Horizontal
- 88191lb
- Breakout Force - SAE
- 61773lb
Weights
- Operating Mass*
- 128448lb
- Operating Mass* - Front Axle
- 54558lb
- Operating Mass* - Rear Axle
- 73853lb
- Operating Mass + Rated Payload*
- 172540lb
- Operating Mass + Rated Payload* - Front Axle
- 125187lb
- Operating Mass + Rated Payload* - Rear Axle
- 47316lb
- Note
- *Calculated weight.
Bucket Capacities
- Bucket Capacities
- 8.9-11.6 m³ (11.6-15.2 yd³)
- Dump Bucket - 1 - Standard Bucket
- 11.6yd³
- Dump Bucket - 2
- 12.4yd³
- Dump Bucket - 3
- 13.7yd³
- Light Material Bucket
- 15.2yd³
Turning Dimensions
- Outside Clearance Radius**
- 296.7in
- Inner Clearance Radius**
- 127.8in
- Axle Oscillation
- 8°
- Articulation Angle
- 42.5°
- Note
- **Clearance dimensions are for reference only.
Service Refill Capacities
- Engine Crankcase
- 9gal (US)
- Transmission
- 16.4gal (US)
- Hydraulic Tank
- 37gal (US)
- Cooling System
- 19.8gal (US)
- Front Differential and Final Drives
- 31.4gal (US)
- Front Differential and Final Drives - With Axle Oil Cooling System
- 42gal (US)
- Rear Differential and Final Drives - With Axle Oil Cooling System
- 44.1gal (US)
- Fuel Tank
- 406.5gal (US)
- Rear Differential and Final Drives
- 33.5gal (US)
Hydraulic Cycle Times
- Raise
- 8.8s
- Dump
- 1.85s
- Lower, Empty, Float Down
- 3.54s
- Total Cycle Time
- 14.2s
Transmission
- Forward - 1
- 3mile/h
- Forward - 2
- 5.7mile/h
- Forward - 3
- 10.2mile/h
- Forward - 4
- 17.5mile/h
- Reverse - 1
- 4.1mile/h
- Reverse - 2
- 7.1mile/h
- Reverse - 3
- 12.7mile/h
- Reverse - 4
- 19.4mile/h
Tires
- Tire Size
- 35/65 R33
Standards
- Standards
- Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab