Specifications
Engine
- Engine Model
- C18 Cat®
- Net Power
- 496HP
- Bore
- 5.7in
- Stroke
- 7.2in
- Displacement
- 1105in³
- Rated Speed
- 1,900/min
- Emissions
- U.S. EPA Tier 4 Final/EU Stage IV, Tier 3 Equivalent, or Tier 2 Equivalent
- Torque Rise
- 52%
- Net - SAE J1349
- 496HP
- Peak Power Speed
- 1500/min
- Peak Torque - 1,300 rpm
- 2092ft·lbf
- Gross - SAE J1349
- 562HP
Weights
- Operating Weight
- 112838lb
Service Refill Capacities
- Cooling System
- 31.7gal (US)
- Crankcase
- 15.9gal (US)
- Transmission
- 31.7gal (US)
- Note (1)
-
All non-road Tier 4 Final/Stage IV Technology diesel engines are required to use:
– Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less - Note (2)
- *Only applicable to Tier 4 Final/Stage IV equipped machines.
- Hydraulic System - Tank Only
- 37gal (US)
- Differential - Final Drives - Rear
- 49.1gal (US)
- Differential - Final Drives - Front
- 49.1gal (US)
- Hydraulic System Factory Fill
- 63.4gal (US)
- Diesel Exhaust Fluid Tank*
- 8.7gal (US)
- Fuel Tank
- 209.5gal (US)
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±13°
Brakes
- Brakes
- ISO 3450: 2011
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Maximum Flow
- 65.8gal/min
- Total Steering Angle
- 86°
- Steering Cycle Times - Low Idle
- 5.7s
- Steering Cycle Times - High Idle
- 3.1s
- Relief Valve Setting - Steering
- 3495psi
- Steering System - Pump
- Piston, variable displacement
Sound Performance - Tier 4 Final/Stage IV: Suppression
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Operator Sound Level (ISO 6396)
- 72dB(A)
- Machine Sound Level (ISO 6395)
- 109dB(A)
Scoops
- Type
- Large capacity scoops for both wood chip and coal applications. A mesh screen integrated into the back of the scoop maintains visibility to the cutting edge. The chip scoop version has extra screens at the top due to higher capacity.
- Components
- Both scoops come with dual lift cylinders for increased lift capacity. Integrated stabilizer system makes sure that the scoop stays stable and centralized on the machine. Scoop tilt function is standard and provides ±15 degrees of tilt to maintain grade c
- Coal Scoop Doze Capacity
- 60yd³
- Chip Scoop Carry Capacity
- 35yd³
- Chip Scoop Doze Capacity
- 70yd³
- Coal Scoop Carry Capacity
- 30yd³
Sound Performance - Tier 2 Equivalent/Stage II: Standard
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Machine Sound Level (ISO 6395)
- 112dB(A)
- Operator Sound Level (ISO 6396)
- 81dB(A)
- Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008.
– The measurement was conducted at 70 percent of the maximum engine cooling fan speed. - Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Transmission
- Note
- Travel speeds based on 35/65-R33 tire.
- Direct Drive - Reverse 3
- 14.3mile/h
- Forward - 3
- 12.6mile/h
- Direct Drive - Reverse 1
- 4.5mile/h
- Forward - 2
- 7.2mile/h
- Direct Drive - Forward 2
- 7.7mile/h
- Forward - 1
- 4.2mile/h
- Direct Drive - Reverse 2
- 8.1mile/h
- Reverse - 2
- 7.6mile/h
- Direct Drive - Forward 3
- 13.7mile/h
- Reverse - 1
- 4.2mile/h
- Reverse - 3
- 13.3mile/h
- Forward - 4
- 22mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 4
- 23.9mile/h
- Transmission Type
- Cat planetary power shift
Sound Performance - Tier 2 Equivalent/Stage II: Suppression
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6395)
- 109dB(A)
- Operator Sound Level (ISO 6396)
- 81dB(A)
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Dimensions (Approximate)
- Height - Edge of Dumped Scoop
- 5ft
- Height - Edge of Retracted Scoop
- 7.4ft
- Dump Angle at Full Lift Height
- 64 deg
- Height - Top of Exhaust Stack
- 14.8ft
- Centerline of Front Axle to Hitch
- 7.5ft
- Length - With Chip Scoop on Ground
- 39.3ft
- Ground to Center of Front Axle
- 3.2ft
- Length - With Coal Scoop on Ground
- 39.3ft
- Height - Top of Cab
- 13.7ft
- Length - Front of Tire
- 28.4ft
- Centerline of Rear Axle to Edge of Bumper
- 10.5ft
- Height - Top of Air Cleaner
- 12.8ft
- Height - Top of Hood
- 10.9ft
- Ground Clearance
- 1.7ft
- Wheel Base
- 14.9ft
Sound Performance - Tier 4 Final/Stage IV - Standard
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. – The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Operator Sound Level (ISO 6396)
- 73dB(A)
- Machine Sound Level (ISO 6395)
- 111dB(A)
Hydraulic System - Lift/Dump/Tilt
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 152.4 mm × 953 mm (6.0 in × 37.5 in)
- Pilot Maximum Flow
- 13.7gal/min
- Pilot Relief Valve Setting
- 580psi
- Maximum Flow at 1,900 rpm
- 153gal/min
- Lift/Tilt System
- Variable displacement piston
- Cylinders, Double Acting - Left and Right Dump, Bore and Stroke
- 127 mm × 838 mm (5.0 in × 33.0 in)
- Lift/Tilt System - Circuit
- Pilot operated LS valve with EH
- Relief Valve Setting - Lift/Tilt
- 4206psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 170.0 mm × 1107 mm (6.7 in × 43.6 in)
- Pilot System
- Variable displacement piston
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Operating Specifications
- Coal Scoop Operating Weight
- 112428lb
- Chip Scoop Operating Weight
- 112838lb
