Specifications
Engine
- Engine Model
- Cat® C32 ACERT™
- Gross Power
- 907HP
- Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
- 900HP
- Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
- 814HP
- Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
- 907HP
- Emissions (Tier 2 Equivalent): Net Power ISO - 9249
- 814HP
- Rated Speed
- 1750r/min
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1958in²
- Peak Torque - 1,200 rpm
- 3139lb/ft
- Torque Rise
- 30%
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
- Note (2)
- Net torque rise meets SAE J139.
- Note (3)
- No engine derating required up to 3050 m (10,000 ft) altitude.
Weights
- Operating Weight
- 224254lb
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Converter Drive - Forward 1
- 4.4mile/h
- Converter Drive - Forward 2
- 7.7mile/h
- Converter Drive - Forward 3
- 13.2mile/h
- Converter Drive - Reverse 1
- 4.8mile/h
- Converter Drive - Reverse 2
- 8.4mile/h
- Converter Drive - Reverse 3
- 14.6mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 8.1mile/h
- Direct Drive - Forward 3
- 14.2mile/h
- Direct Drive - Reverse 1
- 5mile/h
- Direct Drive - Reverse 2
- 8.9mile/h
- Direct Drive - Reverse 3
- 15.6mile/h
- Note
- Travel speeds based on 45/65-45 L-5 46 ply tires.
Hydraulic System - Lift/Tilt
- Output at 1,850 rpm and 6900 kPa (1,000 psi)
- 161gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
- 177 mm × 1760 mm (0.58 ft × 5.8 ft)
- Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
- 267 mm × 286 mm (0.88 ft × 0.94 ft)
- Relief Valve Setting - Lift (Large Pump)
- 3289psi
- Relief Valve Setting - Tilt (Small Pump)
- 3560psi
Service Refill Capacities
- Fuel Tank - Standard
- 413gal (US)
- Cooling System
- 53gal (US)
- Crankcase
- 32gal (US)
- Transmission
- 45gal (US)
- Differential - Final Drives - Front
- 98gal (US)
- Differential - Final Drives - Rear
- 90gal (US)
- Hydraulic System - Implement and Brakes - Tank Only
- 81gal (US)
- Hydraulic System - Steering and Engine Cooling Fan - Tank Only
- 77gal (US)
Axles
- Front
- Fixed
- Rear
- Oscillating at ±10 degrees
- Maximum Single-Wheel Rise and Fall
- 22.6in
Brakes
- Brakes
- Meets ISO 3540:2011
Blades
- Blade Capacities
- 25 to 45 m³ (33 to 58 yd³)
Cab
- Air Conditioning
- Standard air conditioning system contains environmentally friendly R134a refrigerant
- Cab - ROPS/FOPS (1)
- Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
- Cab - ROPS/FOPS (2)
- SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
- ROPS
- ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
- FOPS
- FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
- Sound Performance (1)
- The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
- Sound Performance (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
- Sound Performance (3)
- Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
- Sound Performance (4)
- The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Steering
- Minimum Turning Radius
- 31ft
- Total Steering Angle
- 86°
- Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)
- 124gal/min
- Relief Valve Setting
- 5004psi
Model 854K (Tier 4)
- Serial Number Prefix
- KK6
Model 854K (Tier 2)
- Serial Number Prefix
- RM6
Dimensions (Approximate)
- Height - Top of ROPS
- 18.25ft
- Height - Top of Exhaust Pipe
- 17.17ft
- Height - Top of Hood
- 13ft
- Ground Clearance
- 27in
- Centerline of Front Axle to Hitch
- 9.67ft
- Centerline of Rear Axle to Edge of Bumper
- 13.75ft
- Wheel Base
- 19.25ft
- Length - With Blade on Ground
- 44ft
