Specifications
Engine
- Net Power
- 541HP
- Engine Model
- Cat® C18 ™
- Net Power - SAE J1349
- 541HP
- Bore
- 5.7in
- Stroke
- 7.2in
- Displacement
- 1105in³
- Torque Rise
- 58%
- Rated Speed
- 1700/min
- Peak Power Speed - 1,500 rpm - Gross - ISO 14396
- 580HP
- Gross - ISO 14396
- 580HP
- Peak Power Speed
- 1500/min
- Peak Power Speed - 1,500 rpm - Gross - SAE J1995
- 588HP
- Peak Torque - 1,200 rpm
- 2104lb/ft
- Peak Power Speed - 1,500 rpm - Net Power - SAE J1349
- 541HP
- Emissions
- Einhaltung von EPA Tier 4 Final (USA)/Stufe V (EU), Tier-2-konform
Operating Specifications
- Operating Weight
- 112574lb
- Rated Payload
- 12.5t
- Rated Payload - Standard
- 12.5t
- Bucket Capacity Range
- 6.4-7.6 m3 (8.3-10 yd3)
- Cat Truck Match - Standard
- 770-772
- Cat Truck Match - High Lift
- 773-775
- Rated Payload - High Lift
- 12.5t
Buckets
- Bucket Capacities
- 5.4-6.3 m3 (7.0-8.3 yd3)
Transmission
- Transmission Type
- Cat-Planetenlastschaltgetriebe
- Forward - 1
- 4mile/h
- Forward - 2
- 7.2mile/h
- Forward - 3
- 12.7mile/h
- Forward - 4
- 21.6mile/h
- Reverse - 1
- 4.7mile/h
- Reverse - 2
- 8.3mile/h
- Reverse - 3
- 14.4mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 7.8mile/h
- Direct Drive - Forward 3
- 13.9mile/h
- Direct Drive - Forward 4
- 24.4mile/h
- Direct Drive - Reverse 1
- 5mile/h
- Direct Drive - Reverse 2
- 8.9mile/h
- Direct Drive - Reverse 3
- 15.8mile/h
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±6°
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Relief Valve Setting - Steering
- 4351psi
- Maximum Flow
- 71.3gal/min
- Steering Cycle Times - Low Idle
- 5.6s
- Total Steering Angle
- 80°
- Steering Cycle Times - High Idle
- 3.4s
Service Refill Capacities
- Fuel Tank
- 181gal (US)
- Cooling System
- 31.7gal (US)
- Crankcase
- 15.9gal (US)
- Transmission
- 31.7gal (US)
- Differential - Final Drives - Front
- 49.1gal (US)
- Differential - Final Drives - Rear
- 49.1gal (US)
- Hydraulic System - Tank Only
- 63.4gal (US)
- Diesel Exhaust Fluid Tank (Tier 4)
- 8.7gal (US)
- Hydraulic System Factory Fill
- 125.5gal (US)
Hydraulic Cycle Time (1,400-1,860 rpm)
- Rack Back
- 4.5s
- Lower Float Down
- 3.5s
- Raise
- 8s
- Total Hydraulic Cycle Time - Empty Bucket
- 18.2s
- Dump
- 2.2s
Sound Performance - Standard
- Operator Sound Level (ISO 6396)
- 71dB(A)
- Machine Sound Level (ISO 6395)
- 111dB(A)
Sound Performance - Suppression
- Operator Sound Level (ISO 6396)
- 70dB(A)
- Machine Sound Level (ISO 6395)
- 109dB(A)
Hydraulic System - Lift/Tilt
- Pilot System
- Variable displacement piston
- Relief Valve Setting - Main
- 551psi
- Maximum Flow
- 13.7gal/min
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 267 mm × 685 mm (10.5 in × 27.0 in)
- Maximum Flow at 1,400-1,860 rpm
- 153gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
- 210 mm × 1050 mm (8.3 in × 41.3 in)
- Lift/Tilt System
- Variable displacement piston
- Lift/Tilt System - Circuit
- EH- Positive Flow Control, Flow Sharing
- Relief Valve Setting - Lift/Tilt
- 4757psi
Brakes
- Brakes
- SAE J1473 OKT90, ISO 3450:1992
