Cat C32 Generator Set (US EPA Tier 4 / IMO III) | N C Machinery

Photos

PDF
PRINT
SHARE

Specifications

Generator Set Specifications

Minimum Rating: 282 ekW
Maximum Rating: 940 ekW
Frequency: 60hz

Engine Specifications

Configuration: Vee-12, 4-stroke-Cycle-Diesel
Aspiration: Turbocharged-aftercooled aspiration
Bore: 5.71in
Stroke: 6.38in
Displacement: 1959in³
Emissions: U.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Rated Engine Speed: 1800 rpm
Governor: Electronic (A5 ECM)
Generator: SR5 - Form Wound
Cooling: Heat exchanger, keel or radiator cooled
Oil Change Interval: 750 hrs
Refill Capacity: Lube Oil System w/ oil filter change: 146 L (38.5 gal)

Generator Set Dimensions

Length: 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width: 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height: 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight: 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Clean Emissions Module (CEM) - Dimensions

6 Brick Z-Flow - Length: 147.7in
Dosing Cabinet - Weight: 209lb
6 Brick Z-Flow - Weight: 1246lb
6 Brick U-Flow - Weight: 1235lb
Dosing Cabinet - Height: 22.8in
6 Brick U-Flow - Width: 56.9in
6 Brick U-Flow - Length: 85in
Dosing Cabinet - Width: 18.8in
6 Brick Z-Flow - Width: 43.5in
6 Brick U-Flow - Height: 23.5in
Dosing Cabinet - Length: 37.4in
6 Brick Z-Flow - Height: 23.5in

Standard/Optional Features

Standard Equipment:

Air Inlet System
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
Control System
- 24V control system
Cooling System
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
Fuel System
- Duplex fuel filters with hybrid fuel lines
- Primary fuel filter with water separator installed on base frame
Generators And Generator Attachments
- IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
Lube System
- Oil fill, simplex filter and dipstick
Mounting System
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
General
- Right or left hand service sides
- Customer wiring and service tool connector

Optional Equipment:

Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant
Alarm And Protection
- MGCP III B control panel with Cat^® Alarm and Protection System
- IP44 generator protection
Exhaust System
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
Charging System
- Charging alternator
Fuel System
- Manual or electric fuel priming pump
- Fuel cooler
Lube System
- Duplex oil filters
Starting System
- Starting motors – air, electric or redundant

Contact N C Machinery today for all of your equipment needs!

Contact Us