336 Excavator

  • Specs Summary
  • Base Power (1st Gear) - Net
    179 HP (133 kW)
  • Net Power - EEC 80/1269
  • Weight*
  • Operating Weight - Typically Equipped
    42647 lb (19344 kg)

140/140 AWD Motor Grader

Reduce your carbon footprint with the latest in emissions reduction technology with the durable 140 motor grader. The 140 motor grader unites comfortability and productivity to get optimal performance on the jobsite. Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.
  • Base Power (1st Gear) - Net 179 HP (133 kW)
  • Bore 4.5 in (115 mm)
  • Stroke 5.9 in (149 mm)
  • Speed at Rated Power ( )
  • Standard Capability 109 °F (43 °C)
  • Maximum Torque - VHP Plus 840 lb/ft (1138 N·m)
  • VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP (149 kW)
  • VHP Plus - Gear - Net Power - Forward 2nd 189 HP (141 kW)
  • VHP Plus - Gear - Net Power - Forward 5th 215 HP (160 kW)
  • VHP Plus - Gear - Net Power - Forward 3rd 200 HP (149 kW)
  • VHP Plus - Gear - Net Power - Forward 8th 231 HP (172 kW)
  • Torque Rise ( )
  • VHP Plus - Gear - Net Power - Reverse 2nd 189 HP (141 kW)
  • VHP Plus - Gear - Net Power - Forward 1st 179 HP (133 kW)
  • VHP Plus - Gear - Net Power - Forward 6th 220 HP (164 kW)
  • VHP Plus - Gear - Net Power - Reverse 1st 179 HP (133 kW)
  • VHP Plus Range - Net ( )
  • Emissions ( )
  • VHP Plus - Gear - Net Power - Forward 7th 225 HP (168 kW)
  • VHP Plus Range - Net - Metric ( )
  • VHP Plus - Gear - Net Power - Forward 4th 210 HP (156 kW)
  • Base Power (1st Gear) - Net - Metric 181 HP (133 kW)
  • High Ambient - Fan Speed - Standard ( )
  • Displacement 567.5 in³ (9.3 l)
  • Number of Cylinders ( )
  • Derating Altitude 10000 ft (3050 m)
  • Engine Model ( )
  • High Ambient - Fan Speed - Maximum ( )
  • High Ambient - Fan Speed - Minimum ( )
  • High - Ambient Capability 122 °F (50 °C)
  • Forward/Reverse Gears ( )
  • Transmission ( )
  • Brakes - Service - Surface Area 3565 in² (23000 cm²)
  • Circuit Type ( )
  • Pump Type ( )
  • Pump Output 55.7 gal/min (210 l/min)
  • Maximum System Pressure 3500 psi (24150 kPa)
  • Reservoir Tank Capacity 16.9 gal (US) (64 l)
  • Standby Pressure 885 psi (6100 kPa)
  • Fuel Capacity 104 gal (US) (394 l)
  • Cooling System 15 gal (US) (57 l)
  • Diesel Exhaust Fluid 5.8 gal (US) (22 l)
  • Engine Oil 7.9 gal (US) (30 l)
  • Tandem Housing - Each 20 gal (US) (76 l)
  • Front Wheel Spindle Bearing Housing 0.13 gal (US) (0.5 l)
  • Circle Drive Housing 1.8 gal (US) (7 l)
  • Front Frame Structure - Height 12.6 in (321 mm)
  • Circle - Height 5.4 in (138 mm)
  • Front Frame Structure - Width 12 in (305 mm)
  • Drawbar - Thickness 0.5 in (12.7 mm)
  • Front-Top/Bottom Plate - Width 12 in (305 mm)
  • Front-Top/Bottom Plate - Thickness 0.87 in (22 mm)
  • Height 19.9 in (506 mm)
  • Width 7.9 in (201 mm)
  • Drive Chain Pitch 2 in (50.8 mm)
  • Wheel Axle Spacing 60 in (1523 mm)
  • Blade Width 12 ft (3.7 m)
  • Moldboard - Height 24 in (610 mm)
  • Moldboard - Thickness 0.87 in (22 mm)
  • Arc Radius 16.3 in (413 mm)
  • Throat Clearance 6.5 in (166 mm)
  • Blade Pull - Base GVW 25269 lb (11462 kg)
  • Blade Pull - Maximum GVW 34262 lb (15541 kg)
  • Blade Down Pressure - Base GVW 16038 lb (7275 kg)
  • Blade Down Pressure - Maximum GVW 29309 lb (13294 kg)
  • Moldboard - Blade Width 12 ft (3.7 m)
  • Maximum Blade Position Angle ( )
  • Maximum Depth of Cut 28.1 in (715 mm)
  • Ripping Depth - Maximum 16.8 in (426 mm)
  • Ripper Shank Holder Spacing 21 in (533 mm)
  • Operating Weight - Typically Equipped - Rear Axle 30592 lb (13876 kg)
  • Maximum Lift Above Ground 18.9 in (480 mm)
  • Top Speed - Reverse 23 mile/h (36.8 km/h)
  • Moldboard Sideshift - Right 26 in (660 mm)
  • Steering Range - Left/Right ( )
  • Reverse - 6th 23 mile/h (36.8 km/h)
  • End Bit - Thickness 0.6 in (16 mm)
  • Front Axle - Height to Center 23.5 in (596 mm)
  • Reverse - 1st 2 mile/h (3.2 km/h)
  • Top Speed - Forward 29 mile/h (46.6 km/h)
  • Forward - 7th 19.9 mile/h (32 km/h)
  • Forward - 2nd 3.4 mile/h (5.5 km/h)
  • Reverse - 5th 15.7 mile/h (25.3 km/h)
  • Forward - 3rd 5 mile/h (8 km/h)
  • Brakes - Service ( )
  • Maximum Shoulder Reach Outside of Tires - Right 77.9 in (1978 mm)
  • Drawbar - Width 3 in (76.2 mm)
  • Transmission - Differential - Final Drives 18.5 gal (US) (70 l)
  • Forward - 5th 10.6 mile/h (17.1 km/h)
  • Sidewall Thickness - Inner 0.63 in (16 mm)
  • Forward - 4th 6.9 mile/h (11 km/h)
  • Cutting Edge Thickness 0.6 in (16 mm)
  • Circle Centershift - Right 28.7 in (728 mm)
  • Forward - 6th 14.5 mile/h (23.3 km/h)
  • Gross Vehicle Weight - Maximum - Front Axle 17075 lb (7745 kg)
  • Forward - 1st 2.5 mile/h (4.1 km/h)
  • Blade Tip Range - Forward ( )
  • Articulation Angle - Left/Right ( )
  • Circle - Diameter 60.2 in (1530 mm)
  • Sidewall Thickness - Outer 0.71 in (18 mm)
  • Front Axle - Wheel Lean - Left/Right ( )
  • Blade Tip Range - Backward ( )
  • Brakes - Parking ( )
  • Hydraulic System - Tank 16.9 gal (US) (64 l)
  • Forward - 8th 29 mile/h (46.6 km/h)
  • Reverse - 2nd 3.7 mile/h (6 km/h)
  • Reverse - 4th 8.4 mile/h (13.5 km/h)
  • Moldboard Sideshift - Left 20.1 in (510 mm)
  • Front Axle - Total Oscillation per Side ( )
  • Hydraulic System - Total 26.4 gal (US) (100 l)
  • Drawbar - Height 6 in (152 mm)
  • Cutting Edge Width 6 in (152 mm)
  • Circle - Blade Beam Thickness 1.6 in (40 mm)
  • Reverse - 3rd 5.4 mile/h (8.7 km/h)
  • Ripper Shank Holders ( )
  • Penetration Force 20812 lb (9440 kg)
  • Pry-Out Force 27794 lb (12607 kg)
  • Machine Length Increase, Beam Raised 40.6 in (1031 mm)
  • Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in (116 mm)
  • Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in (467 mm)
  • Mid, V-Type - Scarifier Shank Holders ( )
  • Rear - Scarifying Depth, Maximum 16.8 in (426 mm)
  • Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in (1031 mm)
  • Front, V-Type - Working Width 47.4 in (1205 mm)
  • Mid, V-Type - Working Width 46.6 in (1184 mm)
  • Mid, V-Type - Scarifying Depth, Maximum 11.5 in (292 mm)
  • Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in (116 mm)
  • Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders ( )
  • Rear - Working Width 84 in (2133 mm)
  • Rear - Scarifier Shank Holders ( )
  • Rear - Scarifier Shank Holder Spacing 10.5 in (267 mm)
  • Operating Weight - Typically Equipped 42647 lb (19344 kg)
  • Gross Vehicle Weight - Maximum - Rear Axle 38069 lb (17268 kg)
  • Gross Vehicle Weight - Base - Front Axle 9343 lb (4238 kg)
  • Gross Vehicle Weight - Base - Rear Axle 28077 lb (12736 kg)
  • Gross Vehicle Weight - Maximum - Total 55144 lb (25013 kg)
  • Gross Vehicle Weight - Base - Total 37420 lb (16974 kg)
  • Operating Weight - Typically Equipped - Total 42647 lb (19344 kg)
  • Height - Top of Cab 130 in (3308 mm)
  • Length - Counterweight to Ripper 399 in (10136 mm)
  • Width - Outside Front Tires 98.9 in (2511 mm)
  • Length - Front Axle to Mid Tandem 241 in (6123 mm)
  • Length - Front Tire to Rear of Machine 351 in (8912 mm)
  • Length - Front Axle to Moldboard 100 in (2552 mm)
  • Length - Between Tandem Axles 60 in (1523 mm)
  • Width - Outside Rear Tires 98.9 in (2511 mm)
  • Width - Tire Center Lines 84.3 in (2140 mm)
  • Height - Front Axle Center 23.5 in (596 mm)
  • Height - Exhaust Stack 128 in (3256 mm)
  • Height - Top of Cylinders 120 in (3040 mm)
  • Ground Clearance - Rear Axle 13.3 in (339 mm)
  • Brakes ( )
  • Sound ( )
  • Steering ( )
  • ROPS/FOPS ( )
  • Maximum Shoulder Reach Outside of Tires - Left 70.5 in (1790 mm)
  • Operating Weight - Typically Equipped - Front Axle 12055 lb (5468 kg)
  • Tandem Oscillation - Front Up ( )
  • Circle Centershift - Left 27.4 in (695 mm)
  • Brakes - Secondary ( )
  • End Bit - Width 6 in (152 mm)
  • Turning Radius - Outside Front Tires 25.59 ft (7.8 m)
  • Tandem Oscillation - Front Down ( )

Standard Equipment

POWER TRAIN

  • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
  • Air-to-air after cooler (ATAAC)
  • Belt, serpentine, automatic tensioner
  • Brakes, oil disc, four-wheel, hydraulic
  • Demand fan, hydraulic, swing-out
  • Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
  • Differential Lock/Unlock, Automatic
  • Drain, engine oil, ecology
  • Economy mode
  • Electronic over speed protection
  • Engine C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
  • Fuel tank, 394 L (104 gal), ground level access and sediment drain
  • Parking brake - multi-disc, sealed, oil-cooled
  • Priming pump, fuel
  • Rear axle, modular
  • Sediment drain, fuel tank
  • Tandem drive
  • Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)

ELECTRICAL

  • Alarm, back up
  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, heavy duty, 1125 CCA
  • Breaker panel, ground accessible
  • Cab harness and electrical hydraulic valves
  • Electrical system, 24V
  • Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
  • Lights, roof-mounted roading, reversing, LED stop and tail
  • Product Link
  • Starter, electric

OPERATOR ENVIRONMENT

  • Accelerator
  • Air conditioning with heater
  • Arm and wrist rest, electronically adjustable
  • Articulation, automatic Return-to-Center
  • Cat Messenger operator information system
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauge, machine level
  • Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
  • Hour meter, digital
  • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
  • Joystick, adjustable armrests
  • Joystick gear selection
  • Joystick hydraulic power steering
  • Ladders, cab, left and right side
  • Lights, night time cab
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio Ready, Entertainment
  • ROPS cab, sound suppressed 70 dB(A)
  • Seat, cloth-covered, comfort suspension
  • Seat belt, retractable 76 mm (3 in)
  • Storage area for cooler/lunchbox
  • Throttle control, electronic
  • Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
  • Windows: tempered: - left and right side wipers - rear and intermittent wiper

FLUIDS

  • Antifreeze
  • Extended Life Coolant to -35° C (-30° F)

TIRES, RIMS AND WHEELS

  • Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight

OTHER STANDARD EQUIPMENT

  • Accumulators, brake, dual certified
  • Anti-glare paint
  • Bumper, rear, integrated with hitch
  • CD ROM Parts Book
  • Clutch, circle drive slip
  • Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
  • Doors (3), engine compartment, locking
  • Drawbar - 6 shoes, replaceable wear strips
  • Electrical hydraulic valves, hydraulic lines for base 8 functions
  • Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
  • Fluid check, ground level
  • Frame, articulated, with safety lock
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Hydraulic lines for base functions
  • Lockout, hydraulic implement (for roading and servicing)
  • Moldboard
  • Mounting, cab roof accessories
  • Pump, hydraulic, high capacity, 98 cm³ (6 in³)
  • Radiator, cleanout access (both sides with swing doors)
  • Secondary steering
  • Serviceability, LH side
  • S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
  • Tandem walkway/guards
  • Tool box

Optional Equipment

ELECTRICAL

  • Alternator, 280 ampere
  • Batteries: extreme duty, 1,400 CCA
  • Lights: Headlights, high
  • Lights: Headlights, low
  • Lights: Working lights, basic
  • Lights: Working lights, plus, LED
  • Lights: Warning: beacon or strobe
  • Lights: Mounting for warning light

GUARDS

  • Articulation guard
  • Fenders, front
  • Fenders, rear
  • Front axle guard
  • Sound suppression (bottom)
  • Sound suppression (enclosure)
  • Transmission

OPERATOR ENVIRONMENT

  • Mirrors, outside: heated 24V
  • Mirrors, outside: mounted
  • Comfort Plus Arrangement
  • Comfort Premium Arrangement

POWER TRAIN

  • All Wheel Drive
  • Precleaner, snow
  • Starter, extreme duty, 1,000 Amps
  • Transmission, autoshift

OTHER ATTACHMENTS

  • AccuGrade ARO
  • Integrated cross slope
  • Accumulators, blade lift
  • Camera, rearview
  • Cat Product Link 321SR
  • Cat Product Link 522
  • Drain, ecology, engine Wiggins
  • Heater, engine coolant: 120V
  • Heater, engine coolant: 240V
  • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
  • Snow wing mounting, frame ready
  • Starting aid, ether
  • Reversing fan, automatic or manual

WORK TOOLS/G.E.T.

  • Blade extension, left hand, 610 mm (2 ft)
  • Blade extension, right hand, 610 mm (2 ft)
  • Counterweight
  • Cutting edges, curved
  • Endbits, overlay
  • Front lift group, mounting
  • Front lift group, mechanical
  • Grader bit, narrow and super penetration
  • Mid-Mount Scarifier, Package
  • Moldboard: 4267 mm × 610 mm × 22 mm (14 ft × 24 in × 7/8 in)
  • Moldboard: 4267 mm × 686 mm × 25 mm (14 ft × 27 in × 1 in)
  • Push plate
  • Ripper, rear
  • Ripper tooth
  • Scarifier, front
  • Snow Arrangement
  • Snow Wing Ready Package
  • Tow hitch

MACHINE ARRANGEMENTS

  • Canadian Arrangement
  • European Arrangement
  • TUV Roading Arrangement

OPTIONAL TIRE ARRANGEMENTS

  • Rim Size - 9 × 24; Wheel Group - Single-Piece; Tires - 14.0R24
  • Rim Size - 13 × 25; Wheel Group - Single-Piece; Tires - 17.5R25
  • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0R24
  • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0-24
  • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
  • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5-25
  • Note: Consult your dealer for individual tire width, size and brand.