336 Excavator

  • Specs Summary
  • Base Power (1st Gear) - Net
    290 HP (216 kW)
  • Net Power - EEC 80/1269
  • Weight*
  • Operating Weight - Typically Equipped
    71454 lb (32411 kg)

16 Motor Grader

The 16 Motor Grader will have a direct impact on mine site productivity and costs. The haul road is either the mine's greatest asset or greatest liability. When haul roads are kept in top condition, trucks live longer and run faster. Good road conditions are key on extending truck life, reducing maintenance, lowering fuel costs and reducing tire damage, as a result, cycle times are improved and more ore is produced at a lower cost. The 16 is ideal fit for:
  • Small to medium size mining operations which run 150 ton or smaller hauling trucks.
  • As a complement to a 24M size motor grader fleet in large mining operations where additional versatility is required for ditch and berm building and cleaning, maintenance of secondary narrower roads or side/bank slope work.
The 16 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.
  • Base Power (1st Gear) - Net 290 HP (216 kW)
  • Bore 5.1 in (130 mm)
  • Stroke 6.2 in (157 mm)
  • Speed at Rated Power ( )
  • Base Power (1st Gear) - Net - Metric 294 HP (216 kW)
  • Displacement 763 in³ (12.5 l)
  • Number of Cylinders ( )
  • Engine Model ( )
  • Forward/Reverse Gears ( )
  • Transmission ( )
  • Circuit Type ( )
  • Pump Type ( )
  • Maximum System Pressure 3590 psi (24750 kPa)
  • Standby Pressure 856 psi (5900 kPa)
  • Fuel Capacity 131 gal (US) (496 l)
  • Cooling System 18.5 gal (US) (70 l)
  • Engine Oil 9.5 gal (US) (36 l)
  • Tandem Housing - Each 34 gal (US) (129 l)
  • Front Wheel Spindle Bearing Housing 0.24 gal (US) (0.9 l)
  • Circle Drive Housing 2.6 gal (US) (10 l)
  • Front Frame Structure - Height 18.1 in (460 mm)
  • Front Frame Structure - Width 14 in (356 mm)
  • Height 25.5 in (648 mm)
  • Width 9.3 in (236 mm)
  • Drive Chain Pitch 2.5 in (63.5 mm)
  • Wheel Axle Spacing 72.5 in (1841 mm)
  • Blade Width 16 ft (4.9 m)
  • Arc Radius 16.3 in (413 mm)
  • Throat Clearance 5 in (126 mm)
  • Maximum Blade Position Angle ( )
  • Maximum Depth of Cut 18.5 in (470 mm)
  • Ripping Depth - Maximum 17.8 in (452 mm)
  • Maximum Lift Above Ground 15.7 in (400 mm)
  • Top Speed - Reverse 25.4 mile/h (40.8 km/h)
  • Moldboard Sideshift - Right 31.1 in (790 mm)
  • Steering Range - Left/Right ( )
  • Reverse - 6th 25.3 mile/h (40.8 km/h)
  • End Bit - Thickness 0.75 in (19 mm)
  • Front Axle - Height to Center 26.4 in (670 mm)
  • Reverse - 1st 2.2 mile/h (3.6 km/h)
  • Top Speed - Forward 32.1 mile/h (51.7 km/h)
  • Forward - 7th 22 mile/h (35.5 km/h)
  • Forward - 2nd 3.8 mile/h (6.1 km/h)
  • Reverse - 5th 17.4 mile/h (28 km/h)
  • Forward - 3rd 5.5 mile/h (8.9 km/h)
  • Brakes - Service ( )
  • Maximum Shoulder Reach Outside of Tires - Right 91 in (2311 mm)
  • Drawbar - Width 3 in (76 mm)
  • Transmission - Differential - Final Drives 34 gal (US) (98.5 l)
  • Forward - 5th 11.8 mile/h (19 km/h)
  • Sidewall Thickness - Inner 0.9 in (22 mm)
  • Forward - 4th 7.6 mile/h (12.3 km/h)
  • Cutting Edge Thickness 1 in (25 mm)
  • Circle Centershift - Right 22 in (560 mm)
  • Forward - 6th 16 mile/h (25.8 km/h)
  • Forward - 1st 2.8 mile/h (4.5 km/h)
  • Blade Tip Range - Forward ( )
  • Articulation Angle - Left/Right ( )
  • Circle - Diameter 71.7 in (1822 mm)
  • Sidewall Thickness - Outer 0.9 in (22 mm)
  • Blade Tip Range - Backward ( )
  • Brakes - Parking ( )
  • Hydraulic System - Tank 18.5 gal (US) (70 l)
  • Forward - 8th 32.1 mile/h (51.7 km/h)
  • Reverse - 2nd 4.1 mile/h (6.6 km/h)
  • Reverse - 4th 9.3 mile/h (15 km/h)
  • Moldboard Sideshift - Left 29.1 in (740 mm)
  • Front Axle - Total Oscillation per Side ( )
  • Hydraulic System - Total 38.6 gal (US) (146 l)
  • Drawbar - Height 8 in (203 mm)
  • Cutting Edge Width 8 in (203 mm)
  • Circle - Blade Beam Thickness 2 in (50 mm)
  • Reverse - 3rd 6 mile/h (9.7 km/h)
  • Ripper Shank Holders ( )
  • Penetration Force 30311 lb (13749 kg)
  • Pry-Out Force 43700 lb (19822 kg)
  • Machine Length Increase, Beam Raised 63.4 in (1610 mm)
  • Operating Weight - Typically Equipped 71454 lb (32411 kg)
  • Brakes ( )
  • Sound ( )
  • Steering ( )
  • ROPS/FOPS ( )
  • Standard - Fan Speed - Minimum ( )
  • Standard - Fan Speed - Maximum ( )
  • Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12973 ft (3954 m)
  • Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270 lb/ft (1721 N·m)
  • Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306 lb/ft (1771 N·m)
  • Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270 lb/ft (1721 N·m)
  • Emissions (2) ( )
  • Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) ( )
  • Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent ( )
  • Standard - Ambient Capability 122 °F (50 °C)
  • Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12176 ft (3711 m)
  • VHP Range - Net - Metric ( )
  • Emissions (3) ( )
  • Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent ( )
  • Maximum Shoulder Reach Outside of Tires - Left 91 in (2311 mm)
  • Emissions (1) ( )
  • VHP Range - Net ( )
  • Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500 ft (3810 m)
  • Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft (36701 N·m)
  • Pump Output* 74 gal/min (280 l/min)
  • Note ( )
  • DEF Tank 4.2 gal (US) (16 l)
  • Front Frame Structure - Thickness 0.6 in (14 mm)
  • Front Axle - Wheel Lean ( )
  • Thickness 1 in (25 mm)
  • Blade Pull* - Base GVW 41039 lb (18615 kg)
  • Down Force - Maximum GVW 43861 lb (19895 kg)
  • Height 31 in (787 mm)
  • Width 16 ft (4.9 m)
  • Down Force - Base GVW 30743 lb (13945 kg)
  • Blade Pull* - Maximum GVW 52878 lb (23985 kg)
  • Shank Holder Spacing - Minimum 17.5 in (445 mm)
  • Gross Vehicle Weight - Maximum Tested - Total 84877 lb (38500 kg)
  • Gross Vehicle Weight - Base** - Total 63528 lb (28816 kg)
  • Gross Vehicle Weight - Typically Equipped - Rear Axle 52201 lb (23678 kg)
  • Gross Vehicle Weight - Typically Equipped - Total 71454 lb (32411 kg)
  • Gross Vehicle Weight - Maximum Tested - Front Axle 26125 lb (11850 kg)
  • Gross Vehicle Weight - Typically Equipped - Front Axle 19253 lb (8733 kg)
  • Gross Vehicle Weight - Maximum Tested - Rear Axle 58753 lb (26650 kg)
  • Gross Vehicle Weight - Base** - Front Axle 17932 lb (8134 kg)
  • Gross Vehicle Weight - Base** - Rear Axle 45596 lb (20682 kg)
  • Ground Clearance - Rear Axle 15.6 in (396 mm)
  • Length - Counterweight to Ripper 474.4 in (12051 mm)
  • Length - Front Axle to Moldboard 120.7 in (3066 mm)
  • Length - Front Axle to Mid Tandem 290 in (7365 mm)
  • Height - Top of Cylinders 121.6 in (3088 mm)
  • Width - Tire Center Lines 106.4 in (2703 mm)
  • Width - Outside Rear Tires 134.3 in (3411 mm)
  • Length - Between Tandem Axles 72.5 in (1841 mm)
  • Height - Top of Cab 146.4 in (3719 mm)
  • Width - Outside Front Tires 134.3 in (3411 mm)
  • Height - Front Axle Center 28.9 in (733 mm)
  • Length - Front Tire to Rear of Machine - Including Tow Hitch 417 in (10593 mm)
  • Height - Exhaust Stack 140 in (3557 mm)
  • Gear - Reverse 3rd-6th 298 HP (222 kW)
  • Gear - Forward 8th 348 HP (259 kW)
  • Gear - Forward 4th 309 HP (227 kW)
  • Wheel Group - 19.5×25 MP (1) ( )
  • Note ( )
  • Wheel Group - 19.5×25 MP (2) ( )
  • Gear - Reverse 1st 294 HP (216 kW)
  • Note (1) ( )
  • Gear - Forward 3rd 298 HP (222 kW)
  • Gear - Forward 3rd 302 HP (222 kW)
  • Wheel Group - 19.5×25 MP (3) ( )
  • Gear - Reverse 3rd-6th 302 HP (222 kW)
  • Gear - Reverse 2nd 294 HP (216 kW)
  • Gear - Forward 7th 332 HP (244 kW)
  • Gear - Forward 6th 325 HP (239 kW)
  • Gear - Forward 6th 320 HP (239 kW)
  • Gear - Forward 8th 353 HP (259 kW)
  • Gear - Forward 5th 311 HP (232 kW)
  • Note (2) ( )
  • Gear - Reverse 1st 290 HP (216 kW)
  • Gear - Reverse 2nd 290 HP (216 kW)
  • Gear - Forward 1st 294 HP (216 kW)
  • Note (1) ( )
  • Gear - Forward 4th 304 HP (227 kW)
  • Gear - Forward 5th 315 HP (232 kW)
  • Gear - Forward 7th 328 HP (244 kW)
  • Gear - Forward 1st 290 HP (216 kW)
  • Gear - Forward 2nd 290 HP (216 kW)
  • Gear - Forward 2nd 294 HP (216 kW)
  • Wheel Group - 19.5×25 MP (4) ( )
  • Shank Holder Spacing - Maximum 20 in (500 mm)
  • Wheel Group - 19.5×25 MP (5) ( )
  • Note (2) ( )
  • Note ( )
  • Optimized VHP Range - Net ( )
  • Tandem Oscillation - Front Up ( )
  • Circle Centershift - Left 27.2 in (690 mm)
  • Brakes - Secondary ( )
  • End Bit - Width 6 in (152 mm)
  • Turning Radius - Outside Front Tires 30.5 ft (9.3 m)
  • Tandem Oscillation - Front Down ( )

Standard Equipment

OPERATOR ENVIRONMENT

  • Adjustable Electric Arm rest
  • Adjustable wrist rest
  • Air conditioner with heater
  • Articulation, automatic Return-to-Center
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
  • Gauges, machine level
  • Information display touch screen
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, cloth-covered, comfort air suspension
  • Storage compartments
  • Throttle control, electronic

POWER TRAIN

  • Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
  • Air-to-air after cooler (ATAAC)
  • Auto Diff Lock
  • Belt, serpentine, automatic tensioner
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent Power to ground
  • Critically Low Fluid Level Monitoring System
  • Differential, lock/unlock
  • Drain, engine oil, high speed
  • Electronic over speed protection
  • Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
  • Engine, compression brake
  • Ether starting aid
  • Fuel tank, fast fill, ground level
  • Fuel-water separator
  • Hydraulic Demand Fan
  • Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
  • OK-to-Start
  • Optimized VHP
  • Parking brake – multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Rear axle, modular
  • Sediment drain, fuel tank
  • Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
  • Transmission, 8F/6R, power shift
  • VIMS no telematics

ELECTRICAL

  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, heavy duty, 1,400 CCA
  • Breaker panel
  • Electrical system, 24V
  • Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
  • Product Link
  • Starter, electric, heavy duty

SAFETY

  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator not present monitoring System
  • Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
  • Rearview camera
  • Seat belt indicator
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
  • Windows, tempered: – Left and right side wipers – Rear with intermittent wiper

OTHER STANDARD EQUIPMENT

  • 3-Bolt blade Bracket
  • AccuGrade ARO
  • Accumulators, blade lift
  • Brake accumulators, dual certified
  • Cat Grade Control Cross Slope
  • CD ROM Parts Book
  • Clutch, circle drive slip
  • Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
  • Doors (four), engine compartment, (two left, two right hand) locking
  • Doors, two service, left and right side
  • Drawbar – six shoe with replaceable wear strips
  • End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
  • Fast fill fuel, 567.8 L/min (150 gpm)
  • Fluid check
  • Frame, articulated, with safety lock
  • Hydraulics, load-sensing
  • Metallic Fuel tank, 496 L (131 gal)
  • Metallic DCM wear strips
  • Modular cooling package
  • Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
  • Radiator, two cleanout access doors
  • Rear bumper
  • Rear tandem access steps and hand bars
  • S∙O∙S ports: engine, hydraulic, transmission, coolant
  • Tandem walkway
  • Top adjust circle wear strips
  • Tow hitch (not available with ripper)

TIRES, RIMS, AND WHEELS

  • A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

  • Extended Life Coolant to –35° C (–31° F)

WORK TOOLS/G.E.T.

  • 4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)

Optional Equipment

OPERATOR ENVIRONMENT

  • Air horn
  • Comfort package
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat heated
  • Seat heated/ventilated
  • Windows cleaning platform and ladders left-right hand side

POWER TRAIN

  • Transmission, autoshift

GUARDS

  • Debris guard
  • Front axle cylinder guard
  • Rear fenders
  • Sound suppression, engine enclosure and transmission
  • Transmission guard

ELECTRICAL

  • Light, LED, warning strobe
  • Lights front LED
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Service lights
  • Working lights halogen
  • Working lights LED

SAFETY

  • Additional monitor for rearview camera
  • Enhanced access platform
  • Fire suppression ready
  • Machine Security System Key
  • Service access platform

OTHER ATTACHMENTS

  • Auto-lube, Centro-matic
  • Auto-lube, ripper enhancement
  • Control, blade, variable float
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves Base+1
  • Hydraulic arrangements with additional hydraulic valves Base+5
  • Product Link Elite dual
  • Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
  • Weather, Cold Plus package

WORK TOOLS/G.E.T.

  • 4.9 m (16 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 1 3∕8 in)
  • Push block, counterweight
  • Ripper, rear
  • Tooth, ripper

FLUIDS

  • Coolant, –51° C (–60° F)