NC Machinery Logo

336 Excavator

  • Specs Summary
  • Minimum Rating
  • Maximum Rating
    18720 kV·A (14976 ekW)
  • Emissions
    ( )
  • Width
    151 in (3800 mm)

16CM46DF

Oil and Gas

  • Maximum Rating 18720 kV·A (14976 ekW)
  • Emissions ( )
  • Bore 18.1 in (460 mm)
  • Stroke 24 in (610 mm)
  • Displacement 98980.5 in³ (1622 l)
  • Engine Control ( )
  • Aspiration ( )
  • Width 151 in (3800 mm)
  • Length 661 in (16800 mm)
  • Height 300 in (7640 mm)
  • Weight 690000 lb (345 ton (US))

Standard Equipment

Engine

  • Motor-driven barring gear, fitted on engine
  • Emergency shutdown equipment with push button for manual emergency stop

Cylinder Head

  • Fuel injector and integrated gas admission valve with easy service and maintenance access
  • Cylinder pressure sensors for highest operational reliability and efficiency, replacing conventional knocking sensor technology
  • Piston, rings and liners designed for operation on gas and liquid fuels

Turbocharger

  • Optimized engine efficiency in gas and diesel operation
  • Blow-off valve and waste gate technology for optimized air-fuel ratio control

Gas System

  • Double-walled gas piping to support an inherently safe engine room concept
  • Leakage detection
  • Gas valve unit
  • Segmented gas detection system on request

Micro Pilot Fuel Injection System

  • Gear driven high pressure fuel pump and filter system with easy service access
  • Reliability combined with service and maintenance simplicity, through individual ignition fuel injector and “in-cylinder head” integrated ignition fuel return pipes

Exhaust System

  • Front-mounted turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
  • Expansion joint separate
  • Separate silencer and spark arrester

Fresh Cooling Water System

  • HT pump, fitted on engine
  • LT pump, separate, vertical design, electric motor driven
  • HT thermostat, remote-mounted, electric controlled
  • Cooling water preheating equipment, fitted on base frame

Lubricating Oil System

  • Safety filter fitted on engine
  • Force pump, fitted on engine
  • Pre-lubrication pump, fitted on base frame, electric motor driven
  • Automatic back-flushing filter
  • Duplex filter with differential pressure indication, fitted on engine
  • Pressure control valve, fitted on engine
  • Thermostat, remote-mounted, electric controlled

Connections

  • Set of connecting parts between flange coupling and flywheel
  • Flexible flange coupling between engine and generator
  • Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
  • Mounting of engine and generator on the base frame
  • Set of bonded rubber rails for resilient mounting of the base frame
  • Set of flexible pipe connections

Instrumentation

  • Gauge board with liquid-dampened pressure gauges for: fuel, lubricating oil, fresh water, starting air and charge air.
  • On-engine thermometers for fuel, lubricating oil, fresh water and charge air
  • Electric remote speed indicator
  • Turbocharger and remote speed indicator
  • Exhaust gas temperature indicator

Monitoring

  • Manual control on engine, including: control panel with start/stop key, speed setting device, mechanical shutdown device, changeover of control functions from engine to remote control
  • Starting solenoid valve on engine, 24 V DC
  • Separate electronic speed governor

Optional Equipment