336 Excavator

  • Specs Summary
  • Base Power (1st Gear) - Net
    304 HP (227 kW)
  • Net Power - EEC 80/1269
  • Weight*
  • Operating Weight - Typically Equipped
    74324 lb (33713 kg)

18 Motor Grader

The 18 builds on the success of the 16M and offers additional power, a wider moldboard and the possibility to use a more aggressive blade angle, making it an ideal fit for mining operations that run 172-tonne (190-ton) or smaller trucks. The 18 enhances operational efficiencies by increasing coverage and reducing the number of passes required to complete the width of the road in certain applications. The 18 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.
  • Base Power (1st Gear) - Net 304 HP (227 kW)
  • Bore 5.1 in (130 mm)
  • Stroke 6.2 in (157 mm)
  • Speed at Rated Power ( )
  • Base Power (1st Gear) - Net - Metric 309 HP (227 kW)
  • Displacement 763 in³ (12.5 l)
  • Number of Cylinders ( )
  • Engine Model ( )
  • Forward/Reverse Gears ( )
  • Transmission ( )
  • Circuit Type ( )
  • Pump Type ( )
  • Maximum System Pressure 3590 psi (24750 kPa)
  • Standby Pressure 856 psi (5900 kPa)
  • Fuel Capacity 131 gal (US) (496 l)
  • Cooling System 18.5 gal (US) (70 l)
  • Engine Oil 9.5 gal (US) (36 l)
  • Tandem Housing - Each 34 gal (US) (129 l)
  • Front Wheel Spindle Bearing Housing 0.24 gal (US) (0.9 l)
  • Circle Drive Housing 2.6 gal (US) (10 l)
  • Front Frame Structure - Height 18.1 in (460 mm)
  • Front Frame Structure - Width 14 in (356 mm)
  • Height 25.5 in (648 mm)
  • Width 9.3 in (236 mm)
  • Drive Chain Pitch 2.5 in (63.5 mm)
  • Wheel Axle Spacing 72.5 in (1841 mm)
  • Blade Width 18 ft (5.5 m)
  • Arc Radius 16.3 in (413 mm)
  • Throat Clearance 5 in (126 mm)
  • Maximum Blade Position Angle ( )
  • Maximum Depth of Cut 18.5 in (470 mm)
  • Ripping Depth - Maximum 17.8 in (452 mm)
  • Maximum Lift Above Ground 15.7 in (400 mm)
  • Top Speed - Reverse 25.3 mile/h (40.8 km/h)
  • Moldboard Sideshift - Right 31.1 in (790 mm)
  • Steering Range - Left/Right ( )
  • Reverse - 6th 25.3 mile/h (40.8 km/h)
  • End Bit - Thickness 0.75 in (19 mm)
  • Front Axle - Height to Center 26.4 in (670 mm)
  • Reverse - 1st 2.2 mile/h (3.6 km/h)
  • Top Speed - Forward 32.1 mile/h (51.7 km/h)
  • Forward - 7th 22 mile/h (35.5 km/h)
  • Forward - 2nd 3.8 mile/h (6.1 km/h)
  • Reverse - 5th 17.4 mile/h (28 km/h)
  • Forward - 3rd 5.5 mile/h (8.9 km/h)
  • Brakes - Service ( )
  • Maximum Shoulder Reach Outside of Tires - Right 103 in (2605 mm)
  • Drawbar - Width 3 in (76 mm)
  • Transmission - Differential - Final Drives 26 gal (US) (98.5 l)
  • Forward - 5th 11.8 mile/h (19 km/h)
  • Sidewall Thickness - Inner 0.9 in (22 mm)
  • Forward - 4th 7.6 mile/h (12.3 km/h)
  • Cutting Edge Thickness 1.4 in (35 mm)
  • Circle Centershift - Right 22 in (560 mm)
  • Forward - 6th 16 mile/h (25.8 km/h)
  • Forward - 1st 2.8 mile/h (4.5 km/h)
  • Blade Tip Range - Forward ( )
  • Articulation Angle - Left/Right ( )
  • Circle - Diameter 71.7 in (1822 mm)
  • Sidewall Thickness - Outer 0.9 in (22 mm)
  • Blade Tip Range - Backward ( )
  • Brakes - Parking ( )
  • Hydraulic System - Tank 18.5 gal (US) (70 l)
  • Forward - 8th 32.1 mile/h (51.7 km/h)
  • Reverse - 2nd 4.1 mile/h (6.6 km/h)
  • Reverse - 4th 9.3 mile/h (15 km/h)
  • Moldboard Sideshift - Left 29.1 in (740 mm)
  • Front Axle - Total Oscillation per Side ( )
  • Hydraulic System - Total 38.6 gal (US) (146 l)
  • Drawbar - Height 8 in (203 mm)
  • Cutting Edge Width 10 in (254 mm)
  • Circle - Blade Beam Thickness 2 in (50 mm)
  • Reverse - 3rd 6 mile/h (9.7 km/h)
  • Ripper Shank Holders ( )
  • Penetration Force 30311 lb (13749 kg)
  • Pry-Out Force 43700 lb (19822 kg)
  • Machine Length Increase, Beam Raised 63.4 in (1610 mm)
  • Operating Weight - Typically Equipped 74324 lb (33713 kg)
  • Brakes ( )
  • Sound ( )
  • Steering ( )
  • ROPS/FOPS ( )
  • Standard - Fan Speed - Minimum ( )
  • Standard - Fan Speed - Maximum ( )
  • Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12973 ft (3954 m)
  • Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270 lb/ft (1721 N·m)
  • Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270 lb/ft (1721 N·m)
  • Emissions (2) ( )
  • Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent ( )
  • Standard - Ambient Capability 122 °F (50 °C)
  • Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12176 ft (3711 m)
  • VHP Range - Net - Metric ( )
  • Emissions (3) ( )
  • Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent ( )
  • Maximum Shoulder Reach Outside of Tires - Left 103 in (2605 mm)
  • Emissions (1) ( )
  • VHP Range - Net ( )
  • Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft (36701 N·m)
  • Pump Output* 74 gal/min (280 l/min)
  • Note ( )
  • DEF Tank 4.2 gal (US) (16 l)
  • Front Frame Structure - Thickness 0.6 in (14 mm)
  • Front Axle - Wheel Lean ( )
  • Thickness 1 in (25 mm)
  • Blade Pull* - Base GVW 47216 lb (21417 kg)
  • Down Force - Maximum GVW 43861 lb (19895 kg)
  • Height 31 in (787 mm)
  • Width 18 ft (5.5 m)
  • Down Force - Base GVW 34008 lb (15426 kg)
  • Blade Pull* - Maximum GVW 52878 lb (23985 kg)
  • Shank Holder Spacing - Minimum 17.5 in (445 mm)
  • Ground Clearance - Rear Axle 16.7 in (423 mm)
  • Length - Counterweight to Ripper 474.4 in (12051 mm)
  • Length - Front Axle to Moldboard 120.7 in (3066 mm)
  • Length - Front Axle to Mid Tandem 290 in (7365 mm)
  • Height - Top of Cylinders 122.6 in (3115 mm)
  • Width - Tire Center Lines 106.4 in (2703 mm)
  • Width - Outside Rear Tires 134.3 in (3411 mm)
  • Length - Between Tandem Axles 72.5 in (1841 mm)
  • Height - Top of Cab 147.5 in (3746 mm)
  • Width - Outside Front Tires 134.3 in (3411 mm)
  • Height - Front Axle Center 29.9 in (760 mm)
  • Length - Front Tire to Rear of Machine - Including Tow Hitch 417 in (10593 mm)
  • Height - Exhaust Stack 141.1 in (3584 mm)
  • Wheel Group - 19.5×25 MP (1) ( )
  • Note ( )
  • Wheel Group - 19.5×25 MP (2) ( )
  • Wheel Group - 19.5×25 MP (3) ( )
  • Wheel Group - 19.5×25 MP (4) ( )
  • Shank Holder Spacing - Maximum 20 in (500 mm)
  • Wheel Group - 19.5×25 MP (5) ( )
  • Note ( )
  • Optimized VHP Range - Net ( )
  • Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) ( )
  • Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) 1306 lb/ft (1771 N·m)
  • Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) 12500 ft (3810 m)
  • Gross Vehicle Weight - Typically Equipped - Rear Axle 53830 lb (24417 kg)
  • Gross Vehicle Weight - Base** - Total 72298 lb (32794 kg)
  • Gross Vehicle Weight - Maximum Tested - Rear Axle 58753 lb (26650 kg)
  • Gross Vehicle Weight - Maximum Tested - Front Axle 26125 lb (11850 kg)
  • Gross Vehicle Weight - Typically Equipped - Front Axle 20494 lb (9296 kg)
  • Gross Vehicle Weight - Base** - Front Axle 19837 lb (8998 kg)
  • Gross Vehicle Weight - Maximum Tested - Total 84877 lb (38500 kg)
  • Gross Vehicle Weight - Typically Equipped - Total 74324 lb (33713 kg)
  • Gross Vehicle Weight - Base** - Rear Axle 52461 lb (23796 kg)
  • Gear - Forward 1st 309 HP (227 kW)
  • Gear - Forward 4th 321 HP (239 kW)
  • Gear - Reverse 2nd 304 HP (227 kW)
  • Gear - Forward 2nd 309 HP (227 kW)
  • Gear - Reverse 2nd 309 HP (227 kW)
  • Gear - Forward 4th 325 HP (239 kW)
  • Gear - Forward 6th 341 HP (251 kW)
  • Gear - Forward 1st 304 HP (227 kW)
  • Gear - Reverse 3rd-6th 311 HP (232 kW)
  • Gear - Forward 3rd 311 HP (232 kW)
  • Gear - Forward 5th 332 HP (244 kW)
  • Gear - Forward 5th 327 HP (244 kW)
  • Gear - Forward 7th 342 HP (255 kW)
  • Note (2) ( )
  • Gear - Forward 2nd 304 HP (227 kW)
  • Gear - Forward 8th 362 HP (266 kW)
  • Gear - Reverse 1st 309 HP (227 kW)
  • Gear - Forward 3rd 315 HP (232 kW)
  • Gear - Forward 7th 347 HP (255 kW)
  • Gear - Reverse 1st 304 HP (227 kW)
  • Note (1) ( )
  • Gear - Forward 6th 337 HP (251 kW)
  • Gear - Forward 8th 357 HP (266 kW)
  • Gear - Reverse 3rd-6th 315 HP (232 kW)
  • Tandem Oscillation - Front Up ( )
  • Circle Centershift - Left 27.2 in (690 mm)
  • Brakes - Secondary ( )
  • End Bit - Width 6 in (152 mm)
  • Turning Radius - Outside Front Tires 30.5 ft (9.3 m)
  • Tandem Oscillation - Front Down ( )

Standard Equipment

OPERATOR ENVIRONMENT

  • Adjustable electric arm rest
  • Adjustable wrist rest
  • Air conditioner with heater
  • Air horn
  • Articulation, automatic Return-to-Center
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine RPM, and hydraulic oil temp)
  • Gauges, machine level
  • Information display touch screen
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, cloth-covered, comfort air suspension
  • Storage compartments
  • Throttle control, electronic

POWER TRAIN

  • Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
  • Air-to-air after cooler (ATAAC)
  • Auto Diff Lock
  • Belt, serpentine, automatic tensioner
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent power to ground
  • Critically Low Fluid Level Monitoring System
  • Differential, lock/unlock
  • Drain, engine oil, high speed
  • Electronic over speed protection
  • Engine ECO Mode: Tier 4 Final/Stage V/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
  • Engine, compression brake
  • Ether starting aid
  • Fuel tank, fast fill, ground level
  • Fuel-water separator
  • Hydraulic Demand Fan
  • Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) equivalent and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards
  • OK-to-Start
  • Optimized VHP
  • Parking brake – multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Rear axle, modular
  • Sediment drain, fuel tank
  • Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) equivalent or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards.
  • Transmission, 8F/6R, power shift
  • VIMS no telematics

GUARDS

  • Front axle cylinder guard
  • Transmission guard

ELECTRICAL

  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, heavy duty, 1,400 CCA
  • Breaker panel
  • Electrical system, 24V
  • Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
  • Product Link
  • Starter, electric, heavy duty

SAFETY

  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator not present monitoring system
  • Paint, glare reducing – top of front frame, rear enclosure and ripper cylinders
  • Rearview camera
  • Seat belt indicator
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (two)
  • Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
  • Light, LED, warning strobe
  • Lights front LED
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Service lights
  • Working lights Halogen
  • Working lights LED

OTHER STANDARD EQUIPMENT

  • 3-bolt blade bracket
  • AccuGrade ARO
  • Accumulators, blade lift
  • Brake accumulators, dual certified
  • Cat Grade Control Cross Slope
  • CD ROM Parts Book
  • Clutch, circle drive slip
  • Cutting edges, flat DH-2 steel: – 254 mm × 35 mm (10 in × 1.4 in) – 19 mm (3⁄4 in) mounting bolts
  • Doors (four), engine compartment, (two left, two right hand) locking
  • Doors, two service, left and right side
  • Drawbar – six shoe with replaceable wear strips
  • End bits, 16 mm (5⁄8 in) DH-2 steel, 19 mm (3⁄4 in) mounting bolts
  • Fast fill fuel 567.8 L/min (150 gpm)
  • Fluid check
  • Frame, articulated, with safety lock
  • Hydraulics, load-sensing
  • Metallic fuel tank, 496 L (131 gal)
  • Metallic DCM wear strips
  • Modular cooling package
  • Moldboard: – 5.5 m × 787 mm × 25 mm (18 ft × 31 in × 1 in) – Hydraulic side shift and tip
  • Radiator, two cleanout access doors
  • Rear bumper
  • Rear tandem access steps and hand bars
  • S·O·S ports: engine, hydraulic, transmission, coolant
  • Tandem walkway
  • Top adjust circle wear strips
  • Fire suppression ready
  • Ripper, rear
  • Push block, counterweight

WORK TOOLS/G.E.T.

  • 5.5 m (18 ft) blade with flat cutting edge 254 mm × 35 mm (10 in × 13⁄8 in)

TIRES, RIMS, AND WHEELS

  • A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight

FLUIDS

  • Extended Life Coolant to –35° C (–31° F)

Optional Equipment

OPERATOR ENVIRONMENT

  • Comfort package
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat heated
  • Seat heated/ventilated
  • Windows cleaning platform and ladders left-right hand side

POWER TRAIN

  • Transmission, autoshift

GUARDS

  • Debris guard
  • Rear fenders
  • Sound suppression, engine enclosure and transmission

SAFETY

  • Additional monitor for rearview camera
  • Enhanced access platform
  • Machine Security System Key
  • Service access platform

OTHER ATTACHMENTS

  • Auto-lube, Centro-matic
  • Auto-lube, ripper enhancement
  • Control, blade, variable float
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves Base+1
  • Hydraulic arrangements with additional hydraulic valves Base+5
  • Product Link Elite dual
  • Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
  • Weather, Cold Plus package

WORK TOOLS/G.E.T.

  • 5.5 m (18 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
  • Tooth, ripper

FLUIDS

  • Coolant, –51° C (–60° F)