336 Excavator

  • Specs Summary
  • Minimum Rating
    ( )
  • Maximum Rating
    ( )
  • Emissions/Fuel Strategy
    ( )
  • Voltage
    ( )

C18 Generator Set

The C18 diesel generator sets has been developed for mission critical, standby and prime applications. Producing reliable power from 455 to 600 ekW at 60 Hz, meeting ISO 8528-5 transient response requirements and built to accept 100 percent rated load in one step. The engines are U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards) Emissions / Fuel Strategy.
  • Minimum Rating ( )
  • Maximum Rating ( )
  • Emissions/Fuel Strategy ( )
  • Voltage ( )
  • Duty Cycle ( )
  • Engine Model ( )
  • Bore 5.71 in (145 mm)
  • Stroke 7.2 in (183 mm)
  • Aspiration ( )
  • Length - Maximum 5550 in (218.5 mm)
  • Width - Maximum 80.9 in (2056 mm)
  • Height - Maximum 107.8 in (2737 mm)
  • Frequency ( )
  • Speed ( )
  • Displacement 1106.4 in³ (18.1 l)
  • Compression Ratio ( )
  • Fuel System ( )
  • Governor Type ( )

Standard Equipment

Air Inlet

  • Air Cleaner

Air Inlet System

  • Turbocharger
  • Light duty air cleaner
  • Aftercooler core

Cooling

  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
  • Coolant drain line with valve
  • Radiator and cooling fan with guard
  • Package mounted radiator

Exhaust

  • Exhaust flange outlet

Exhaust System

  • Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use; shipped loose

Fuel System

  • Standard 8 hour open set fuel tank

Fuel

  • Secondary fuel filter
  • Fuel priming pump
  • Primary fuel filter with integral water separator

Generator and Attachments

  • Matched to the performance and output characteristics of Cat engines
  • Segregated low voltage (AC/DC) wiring panel
  • Power center, IP22
  • A frame generator - IP21 protection
  • Integrated Voltage Regulator
  • Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
  • Integrated Voltage Regulator

Generator

  • IP23 Protection
  • Matched to the performance and output characteristics of Cat engines
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Power Termination

  • Bus Bar

Control System

  • EMCP 4.2

Governing System

  • Cat Electronic Governor (ADEM A4)

Control Panel

  • EMCP 4 Genset Controller

Lube System

  • Lubricating oil
  • Oil drain valves

Mounting System

  • Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines

Mounting

  • Rubber vibration isolators

Starting/Charging

  • 24 Volt battery with rack and cables
  • 24 volt starting motor
  • Batteries

General

  • Engine and alternator pre-paint, Caterpillar yellow
  • Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment

Air Inlet System

  • Single element air cleaner
  • Dual element air cleaner

Exhaust

  • Industrial, Residential, Critical Mufflers

Generator

  • Oversize and premium generators
  • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
  • Anti-condensation heater

Power Termination

  • Circuit breakers, UL listed
  • Circuit breakers, IEC compliant

Circuit Breakers

  • 3 Pole (IEC-100% rated) circuit breakers - Motorised
  • 4 Pole (IEC-100% rated) circuit breakers - Motorised
  • Shunt trip for IEC breaker
  • Power terminal strip
  • Circuit breaker (IEC) auxiliary contacts
  • 3 Pole (IEC-100% rated) circuit breakers - Package mounted
  • Pad-lockable circuit breaker device
  • 4 Pole (IEC-100% rated) circuit breakers - Package mounted

Control Panels

  • Remote monitoring software
  • Load share module
  • Local & remote annunciator modules
  • EMCP (4.2) (4.3) (4.4)
  • Digital I/O module

Control System

  • Local alarm modules
  • Volt free contact
  • Local alarm horn
  • Remote annunciator modules
  • Oil temperature displays
  • Protective devices: Earth fault relay - earth leageage ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - high fuel level alarm - Fuel level sensor
  • EMCP 4.4

Cooling System

  • Low coolant temperature alarm
  • Radiator duct flange

Enclosures

  • Sound attenuated enclosures

Starting/Charging

  • Jacket water heater
  • Battery chargers
  • Heavy-duty starting system
  • Oversize batteries
  • Charging alternator

Exhaust System

  • 8 and 10 inch GP flanges
  • 8 and 10 inch elbow kits
  • Engine mounted muffler
  • 10, 25 and 35 end in / end out Mufflers
  • Manifold and Turbocharger guard

Fuel System

  • Manual fuel transfer pump
  • Fuel transfer system
  • Integral - Duel wall fuel tank base

General

  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • Integral & sub-base UL listed dual wall fuel tanks
  • CSA Certification
  • Automatic transfer switches (ATS)
  • The following options are based on regional and product configuration:
  • Single or dual wall sub-base fuel tanks
  • EU Certificate of Conformance (CE)
  • EEC Declaration of Conformity
  • UL 2200 package
  • Single or dual wall integral fuel tanks
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • Narrow, Wide or Skid Base
  • Enclosures: sound attenuated, weather protective

Generator and Attachments

  • Space heaters
  • A frame CIP generator
  • Permanent magnet excitation
  • LC frame generator
  • A frame oversize generator
  • Ingress protection
  • LC frame CIP generator
  • LC frame oversize generators

Lube System

  • Manual sump pump

Starting and Charging

  • Battery disconnect switch
  • Jacket water heaters
  • 5 Amp battery charger