NC Machinery Logo

336 Excavator

  • Specs Summary
  • Power Range
  • 6 Brick Z-Flow - Length
  • Speed Range
  • 6 Brick Z-Flow - Height

C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

  • Minimum Width 31.4 in (798 mm)
  • Maximum Width 33.5 in (850 mm)
  • Displacement 428 in³ (7.01 l)
  • Bore 4.13 in (105 mm)
  • Aspiration ( )
  • Configuration ( )
  • Stroke 5.31 in (135 mm)
  • Emissions ( )
  • Length 43.1 in (1095 mm)
  • Height 35.1 in (891 mm)
  • Cooling ( )
  • Flywheel Housing ( )
  • Oil Change Interval ( )
  • Governor ( )
  • Refill Capacity ( )
  • Rotation ( )
  • Rated Engine Speed ( )

Standard Equipment

COOLING SYSTEM

  • Gear driven jacket water pump
  • Corrosion resistant sea water aftercooler
  • Fuel cooler

EXHAUST SYSTEM

  • Watercooled turbocharger and exhaust manifold

FUEL SYSTEM

  • Common rail fuel system
  • Electric fuel priming pump

GENERAL

  • Vibration damper and guard
  • Self-tensioning multi-vee belt drive

LUBE SYSTEM

  • Closed crankcase ventilation system
  • Integral engine oil cooler

MOUNTING SYSTEM

  • Front and rear engine mounting brackets

STARTING SYSTEM

  • Starter motors - 12V or 24V

Optional Equipment

AIR INLET SYSTEM

  • Various 6" water cooled exhaust elbow configurations

COOLING SYSTEM

  • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
  • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
  • Jacket water heater
  • Cabin heater (calorifier) connections

FUEL SYSTEM

  • SOLAS double wall high pressure fuel lines kit

LUBE SYSTEM

  • Left-hand and right-hand oil dipsticks
  • Transmission gear oil cooler (engine mounted)

PROTECTION SYSTEM

  • Additional engine and transmission sensor packages for on or off vessel monitoring

STARTING SYSTEM

  • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
  • Glow plugs