NC Machinery Logo

336 Excavator

  • Specs Summary
  • Minimum Rating
    ( )
  • Maximum Rating
    ( )
  • Frequency
    ( )
  • Speed
    ( )

Cat C280-16 Marine Generator Set

Marine
  • Minimum Rating ( )
  • Maximum Rating ( )
  • Frequency ( )
  • Speed ( )
  • Aspiration ( )
  • Bore 11 in (280 mm)
  • Stroke 11.8 in (300 mm)
  • Displacement 18062 in³ (296 l)
  • Governor Type ( )
  • Fuel System ( )
  • Compression Ratio 50 Hz ( )
  • Compression Ratio 60 Hz ( )
  • Length 366.7 in (9314 mm)
  • Width 78.3 in (1990 mm)
  • Height 164.1 in (4167 mm)
  • Emissions/Fuel Strategy ( )
  • Weight ( )
  • Engine Model ( )

Standard Equipment

Air Inlet System

  • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated

Control System

  • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)

Cooling System

  • Engine coolant water drains

Exhaust System

  • Dry, gas tight, exhaust manifold

Fuel System

  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors

Lube Oil System

  • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves

General

  • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Optional Equipment