NC Machinery Logo

336 Excavator

  • Specs Summary
  • Length
  • Height
  • Minimum Rating
    1047 BHP (781 bkW)
  • Maximum Rating
    1332 BHP (994 bkW)

Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

  • Emissions ( )
  • Governor ( )
  • Aspiration ( )
  • Flywheel Housing ( )
  • Minimum Width 57.1 in (1451 mm)
  • Maximum Width 57.3 in (1455 mm)
  • Refill Capacity ( )
  • Minimum Rating 1047 BHP (781 bkW)
  • Maximum Rating 1332 BHP (994 bkW)
  • Stroke 6.38 in (162 mm)
  • Bore 5.71 in (145 mm)
  • Rotation ( )
  • Rated Engine Speed ( )
  • Minimum Length 83.9 in (2130 mm)
  • Minimum Engine Dry Weight 6950 lb (3152 kg)
  • Configuration ( )
  • Minimum Height 59.3 in (1507 mm)
  • Maximum Length 89.8 in (2280 mm)
  • Maximum Engine Dry Weight 7160 lb (3248 kg)
  • Maximum Height 63.5 in (1613 mm)
  • Oil Change Interval ( )
  • Displacement 1959 in³ (32.1 l)
  • Cooling ( )
  • 6 Brick Z-Flow - Weight 1246 lb (565 kg)
  • 6 Brick Z-Flow - Width 43.5 in (1106 mm)
  • Dosing Cabinet - Length 37.4 in (949 mm)
  • Dosing Cabinet - Width 18.8 in (477 mm)
  • 6 Brick U-Flow - Height 23.5 in (597 mm)
  • 6 Brick Z-Flow - Height 23.5 in (597 mm)
  • 6 Brick U-Flow - Weight 1235 lb (560 kg)
  • Dosing Cabinet - Weight 209 lb (95 kg)
  • 6 Brick U-Flow - Width 56.9 in (1445 mm)
  • 6 Brick Z-Flow - Length 147.7 in (3751 mm)
  • Dosing Cabinet - Height 22.8 in (579 mm)
  • 6 Brick U-Flow - Length 85 in (2159 mm)

Standard Equipment

AIR INLET SYSTEM

  • Separate circuit aftercooled (SCAC)
  • Closed crankcase fumes disposal

CONTROL SYSTEM

  • 24V control system

COOLING SYSTEM

  • Heat exchanger or Keel Cooling
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN

FUEL SYSTEM

  • Duplex fuel filters with hybrid fuel lines
  • Shipped loose primary fuel filter with water separator
  • Fuel transfer and priming pump

LUBE SYSTEM

  • Oil fill, simplex filter and dipstick
  • Deep or shallow sump oil pan

MOUNTING SYSTEM

  • Adjustable front support mounting system

GENERAL

  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

ALARM AND PROTECTION

  • MECP I control panel
  • MECP III control panel with Cat® Alarm and Protection System

EXHAUST SYSTEM

  • Water-in-fuel and exhaust temperature sensors
  • Muffler

CHARGING SYSTEM

  • Charging alternator

FUEL SYSTEM

  • Manual or electric fuel priming pump
  • Fuel cooler

LUBE SYSTEM

  • Duplex oil filters

POWER TAKE-OFFS

  • Front drives including stub shaft and pump drive
  • Rear SAE A or B pump drives

STARTING SYSTEM

  • Starting motors – air, electric or redundant