NC Machinery Logo

336 Excavator

  • Specs Summary
  • Power Range
  • 6 Brick Z-Flow - Length
    147.7 in (3751 mm)
  • Speed Range
  • 6 Brick Z-Flow - Height
    23.5 in (597 mm)

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

  • Maximum Length 89.8 in (2280 mm)
  • Minimum Height 59.3 in (1507 mm)
  • Minimum Width 57.1 in (1451 mm)
  • Maximum Width 57.3 in (1455 mm)
  • Displacement 1959 in³ (32.1 l)
  • Bore 5.71 in (145 mm)
  • Minimum Length 83.9 in (2130 mm)
  • Aspiration ( )
  • Configuration ( )
  • Stroke 6.38 in (162 mm)
  • Maximum Height 63.5 in (1613 mm)
  • Emissions ( )
  • Cooling ( )
  • Flywheel Housing ( )
  • Oil Change Interval ( )
  • Governor ( )
  • Refill Capacity ( )
  • Rotation ( )
  • 6 Brick Z-Flow - Length 147.7 in (3751 mm)
  • 6 Brick Z-Flow - Height 23.5 in (597 mm)
  • 6 Brick Z-Flow - Width 43.5 in (1106 mm)
  • 6 Brick U-Flow - Length 85 in (2159 mm)
  • 6 Brick U-Flow - Height 23.5 in (597 mm)
  • 6 Brick U-Flow - Width 56.9 in (1445 mm)
  • Dosing Cabinet - Length 37.4 in (949 mm)
  • Dosing Cabinet - Height 22.8 in (579 mm)
  • Dosing Cabinet - Width 18.8 in (477 mm)
  • Rated Engine Speed ( )

Standard Equipment

CONTROL SYSTEM

  • 24V control system

COOLING SYSTEM

  • Heat exchanger or Keel Cooling
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN

LUBE SYSTEM

  • Oil fill, simplex filter and dipstick
  • Deep or shallow sump oil pan

MOUNTING SYSTEM

  • Adjustable front support mounting system

GENERAL

  • Right or left hand service sides
  • Customer wiring and service tool connector

AIR INLET SYSTEM

  • Separate circuit aftercooled (SCAC)
  • Air cleaner

FUEL SYSTEM

  • Duplex fuel filters with hybrid fuel lines
  • Fuel transfer and priming pump
  • Shipped loose primary fuel filter with water separator

Optional Equipment

AIR INLET SYSTEM

  • Closed crankcase fumes disposal

ALARM AND PROTECTION

  • MECP I control panel
  • MECP III B control panel with Cat® Alarm and Protection System

CHARGING SYSTEM

  • Charging alternator

FUEL SYSTEM

  • Fuel cooler
  • Manual or electric fuel priming pump

LUBE SYSTEM

  • Duplex oil filters

POWER TAKE-OFFS

  • Front drives including stub shaft and pump drive
  • Rear SAE A or B pump drives

STARTING SYSTEM

  • Starting motors – air, electric or dual