336 Excavator

  • Specs Summary
  • Maximum Power
    130 HP (97 kW)
  • Maximum Torque
    369 lb-ft @ 1500 rpm (500 Nm @ 1500 rpm)
  • Emissions
    ( )
  • Rated Speed
    ( )

Cat®3054C Industrial Diesel Engine

Cat® 3054C Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of mechanical fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment. 3054C engines, with ratings: 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm, meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for non-regulated areas.

  • Maximum Power 130 HP (97 kW)
  • Maximum Torque 369 lb-ft @ 1500 rpm (500 Nm @ 1500 rpm)
  • Rated Speed ( )
  • Minimum Power 69.7 HP (52 kW)
  • Emissions ( )
  • Engine Configuration ( )
  • Bore 4.1 in (105 mm)
  • Stroke 5 in (127 mm)
  • Displacement 269 in³ (4.4 l)
  • Compression Ratio ( )
  • Aspiration ( )
  • Combustion System ( )
  • Rotation from Flywheel End ( )
  • Width 24.4 in (620 mm)
  • Height 31.9 in (810 mm)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 674.6 lb (306 kg)
  • Aftertreatment ( )
  • Length 26.1 in (663 mm)

Standard Equipment

Air Inlet System

  • Inlet manifold with choice of inlets.

Control System

  • Alternator
  • Starter motor
  • Control Panel
  • Glow plug starting aid

Cooling System

  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix

Flywheels and Flywheel Housing

  • SAE No. 3 flywheel housing
  • Flywheel and starter rings

Fuel System

  • Fuel filter positions

Lube System

  • Lubricating oil filters and breathers
  • Oil filter positions
  • Lube oil sump

Power Take Off

  • SAE B Power Take Off (PTO)

General

  • Timing case and gear-driven auxiliaries
  • Belt-driven auxiliaries
  • Engine mountings
  • Gauges
  • Displays
  • Power and torque curve tailoring
  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment