336 Excavator

  • Specs Summary
  • Maximum Power
    2100 HP (1566 kW)
  • Maximum Torque
    8275 lb-ft @ 1400 rpm (11220 Nm @ 1400 rpm)
  • Emissions
    ( )
  • Rated Speed
    ( )

Cat® 3516E Diesel Engine

The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.

The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.

The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.

  • Maximum Power 2100 HP (1566 kW)
  • Maximum Torque 8275 lb-ft @ 1400 rpm (11220 Nm @ 1400 rpm)
  • Rated Speed ( )
  • Minimum Power 2100 HP (1566 kW)
  • Emissions ( )
  • Engine Configuration ( )
  • Bore 6.7 in (170 mm)
  • Stroke 8.5 in (215 mm)
  • Displacement 4760 in³ (78 l)
  • Compression Ratio ( )
  • Aspiration ( )
  • Combustion System ( )
  • Rotation from Flywheel End ( )
  • Width 63.6 in (1616 mm)
  • Height 83 in (2108 mm)
  • Weight - Net Dry - Basic Operating Engine Without Optional Attachments 18025 lb (8176 kg)
  • Length 92.5 in (2350 mm)
  • Width 79.1 in (2008 mm)
  • Height 31.9 in (809 mm)
  • Weight 2378 lb (1079 kg)
  • Aftertreatment ( )
  • Length 122.2 in (3105 mm)

Standard Equipment

Air Inlet System

  • Four turbochargers, centre mounted
  • Air-to-Air Aftercooled (ATAAC)

Control System

  • Electronic engine control

Exhaust System

  • Two exhaust outlets, 203 mm (8 in) round flange
  • Exhaust manifold, dry
  • Four turbochargers with watercooled bearings

Cooling System

  • Gear-driven centrifugal jacket water pump
  • Connections for radiator cooling
  • Thermostats and housing

Flywheels and Flywheel Housing

  • Flywheel housing, SAE No. 0 or SAE No. 00
  • Flywheel, SAE No. 18 or SAE No. 21
  • SAE standard rotation

Fuel System

  • Fuel filter, LH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors

Lube System

  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler and dipstick, LH
  • Oil pump
  • Oil filter, LH, spin-on type
  • Front sump oil pan, 500-hour change interval

General

  • Paint: Caterpillar yellow, with optional colors available at request
  • Vibration damper
  • Lifting eyes

Optional Equipment