336 Excavator

  • Specs Summary
  • Engine Model
    ( )
  • Power - Net
    104 HP (77.6 kW)
  • Operating Weight - XL
    20313 lb (9214 kg)
  • Operating Weight - LGP
    20992 lb (9522 kg)

D5K2 Track-Type Tractor

Traction control, power pitch and improved blade control make the K2 machines even more productive, precise and efficient. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. All three models meet U.S. EPA Tier 4 Final/EU Stage IV emissions requirements. From the first cut to finish grade, the K2 Family sets the standard.
  • Engine Model ( )
  • Power - Net 104 HP (77.6 kW)
  • Displacement 269 in³ (4.4 l)
  • Bore 4.13 in (105 mm)
  • Stroke 5 in (127 mm)
  • Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 HP (77.6 kW)
  • Note ( )
  • Drive Pumps ( )
  • Relief Valve Settings 7033 psi (48500 kPa)
  • Maximum Travel Speed - Reverse 6.2 mile/h (10 km/h)
  • Maximum Travel Speed - Forward 5.6 mile/h (9 km/h)
  • Track Motors ( )
  • Operating Weight - XL 20313 lb (9214 kg)
  • Operating Weight - LGP 20992 lb (9522 kg)
  • Transmission - Hydraulic Tank 15.7 gal (US) (59.5 l)
  • Final Drive - Each - LGP 2.6 gal (US) (10 l)
  • Fuel Tank 51.5 gal (US) (195 l)
  • Crankcase - With Filter 2.91 gal (US) (11 l)
  • Final Drive - Each - XL 2.6 gal (US) (10 l)
  • Cooling System 5.92 gal (US) (22.4 l)
  • Pump Output 17.7 gal/min (68 l/min)
  • Relief Valve Settings 2988 psi (20600 kPa)
  • Ground Pressure - XL 5.6 psi (38.6 kPa)
  • Track Gauge - LGP 69 in (1750 mm)
  • Shoe Width - XL 20 in (510 mm)
  • Ground Contact Area - XL 3652 in² (23562 cm²)
  • Ground Pressure - LGP 4.5 psi (31.1 kPa)
  • Length - Track on Ground - XL 91 in (2310 mm)
  • Shoe Width - LGP 26 in (660 mm)
  • Ground Contact Area - LGP 4726 in² (30492 cm²)
  • Track Gauge - XL 63 in (1600 mm)
  • Length - Track on Ground - LGP 91 in (2310 mm)
  • Type ( )
  • Number of Shanks ( )
  • Height 6.5 in (165 mm)
  • Weight 1222 lb (554 kg)
  • Maximum Reach - Ground Line 21.9 in (555 mm)
  • Maximum Digging Depth 13.3 in (337.5 mm)
  • Maximum Ground Clearance Under Tip 17.6 in (448 mm)
  • Overall Width 67.3 in (1710 mm)
  • Weight 1345 lb (610 kg)
  • Winch Drive ( )
  • Control ( )
  • Speed ( )
  • Drum Diameter 10 in (254 mm)
  • Throat Clearance 6.75 in (171.5 mm)
  • Overall Width 29.2 in (741 mm)
  • Maximum Line Pull - Full Drum 25000 lb (11340 kg)
  • Maximum Line Speed - Bare Drum 131 ft/min (40 m/min)
  • Winch Length 27.76 in (705 mm)
  • Drum Width 10.8 in (274 mm)
  • Drum Capacity - Recommended Cable 371 ft (113 m)
  • Rope Diameter - Optional 0.75 in (19 mm)
  • Maximum Line Pull - Bare Drum 40000 lb (18144 kg)
  • Drum Capacity - Optional Cable 256 ft (78 m)
  • Maximum Line Speed - Full Drum 207 ft/min (63 m/min)
  • Rope Diameter - Recommended 0.63 in (16 mm)
  • Sound Levels - ISO 6396:2008 79 dB(A) (79 dB(A))
  • Track Gauge - LGP 68.9 in (1750 mm)
  • BLADE: Blade Width at Maximum Angle - XL 103.8 in (2636 mm)
  • Tractor Height - LGP 109 in (2769 mm)
  • BLADE: Maximum Tilt - LGP 17.6 in (448 mm)
  • BLADE: Digging Depth - XL 23.1 in (586 mm)
  • BLADE: Blade Width at Maximum Angle - LGP 115.8 in (2940 mm)
  • BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate ( )
  • BLADE: Digging Depth - Intermediate 22.5 in (572 mm)
  • BLADE: Blade Lift Height - Intermediate 30.2 in (767 mm)
  • BLADE: Maximum Tilt - Intermediate 17.6 in (448 mm)
  • BLADE: Blade Lift Height - LGP 30.2 in (767 mm)
  • Track Gauge - XL 63 in (1600 mm)
  • Width - Tractor - Standard Shoes - No Blade - LGP 94.9 in (2410 mm)
  • Width - Tractor - Standard Shoes - No Blade - XL 83.1 in (2110 mm)
  • Overall Length - With Blade - LGP 169.1 in (4309 mm)
  • BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ (2.34 m³)
  • BLADE: Blade Lift Height - XL 30.2 in (767 mm)
  • Length - Basic Tractor - Without Blade - LGP 128.5 in (3265 mm)
  • Length - Basic Tractor - Without Blade - XL 128.5 in (3265 mm)
  • BLADE: Blade Capacity (SAE) - Intermediate 2.73 yd³ (2.09 m³)
  • Sound Levels - SAE J1166 FEB2008 79 dB(A) (79 dB(A))
  • BLADE: Blade Width - XL 109.5 in (2782 mm)
  • BLADE: Blade Height - LGP 39.8 in (1010 mm)
  • Tractor Height - XL 109 in (2769 mm)
  • BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in (2669 mm)
  • ROPS ( )
  • FOPS ( )
  • BLADE: Maximum Tilt - XL 15.8 in (402 mm)
  • Ground Clearance - XL 13 in (332 mm)
  • BLADE: Blade Height - Intermediate 39.8 in (1010 mm)
  • BLADE: Blade Width - LGP 126.7 in (3220 mm)
  • Number of Rollers - Each Side ( )
  • BLADE: Maximum Angle (either side) - Intermediate ( )
  • BLADE: Blade Width - Intermediate 115 in (2921 mm)
  • BLADE: Maximum Angle (either side) - LGP ( )
  • BLADE: Digging Depth - LGP 22.5 in (572 mm)
  • Number of Shoes - Each Side - SystemOne Undercarriage ( )
  • BLADE: Blade Cutting Edge Angle, Adjustable - LGP ( )
  • Ground Clearance - LGP 13 in (332 mm)
  • BLADE: Maximum Angle (either side) - XL ( )
  • BLADE: Blade Height - XL 42.2 in (1073 mm)
  • Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) (19 l)
  • BLADE: Blade Cutting Edge Angle, Adjustable - XL ( )
  • BLADE: Blade Capacity (SAE) - XL 2.86 yd³ (2.19 m³)
  • Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage ( )
  • Overall Length - With Blade - XL 170.1 in (4309 mm)
  • Ground Contact Area - LGP, 762 mm (30 in) 5514 in² (35574 cm²)
  • Ground Pressure - LGP, 762 mm (30 in) 3.93 psi (27.1 kPa)
  • Track Gauge - LGP, 762 mm (30 in) 73.2 in (1860 mm)
  • Operating Weight - LGP, 762 mm/30 in 21442 lb (9726 kg)
  • Shoe Width - LGP, 762 mm (30 in) 30 in (762 mm)
  • Length - Track on Ground - LGP, 762 mm (30 in) 91 in (2310 mm)
  • Note ( )
  • Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) 103.5 in (2630 mm)
  • Ground Clearance - LGP, 770 mm (30 in) Shoes 13 in (332 mm)
  • Track Gauge - LGP, 770 mm (30 in) 73.2 in (1860 mm)
  • Overall Length - With Blade - LGP, 770 mm (30 in) Shoes 169.1 in (4309 mm)
  • Tractor Height - LGP, 770 mm (30 in) 109 in (2769 mm)
  • Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes 128.5 in (3265 mm)
  • Net Power - 2,200 rpm - SAE J1349 104 HP (77.6 kW)

Standard Equipment

ELECTRICAL

  • Alternator, 12 volt, 120 Amp, heavy duty brushless
  • Alarm, backup
  • Batteries (2), heavy duty, maintenance free, 2,000 CCA
  • Diagnostic connector
  • Horn, electric
  • Lights, halogen, 2 front and 2 rear
  • Starter, electric, 12 volt

OPERATOR STATION

  • ROPS/FOPS canopy
  • Seat, air suspended, cloth or vinyl
  • Seatbelt, retractable 76 mm (3 in)
  • Foot pads, dash
  • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
  • Slope Indicate
  • Throttle switch, rotary
  • Eco mode
  • Controls, seat mounted, fore/aft adjustment
  • Armrests, adjustable
  • Mirror, rearview, inside
  • Single pedal combining deceleration and braking functions
  • Independent forward/reverse speed settings
  • Power port, 12 volt
  • Coat hook
  • Storage compartment
  • Cup holder
  • Floor mat, rubber, heavy duty

HYDRAULICS

  • Hydraulics, 3 valve
  • Load sensing hydraulics
  • Single lever, three function control
  • Hydraulic pump and oil
  • Stable blade control

POWER TRAIN

  • Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
  • Aftercooler, Air-to-Air (ATAAC)
  • Aluminum bar plate cooling system (radiator, power train)
  • Air cleaner with precleaner, automatic dust ejection and under-hood intake
  • Dual path, closed-loop hydrostatic transmission
  • Electric fuel priming pump
  • Fuel/water separator
  • Automatic Traction Control

UNDERCARRIAGE

  • SALT Undercarriage
  • 7 roller track frame
  • Track rollers, lifetime lubricated
  • Carrier rollers
  • Track adjusters, hydraulic
  • Guards, front/rear guiding
  • Master link

OTHER STANDARD EQUIPMENT

  • Cat Product Link™ PL631 Satellite/PL641 Cellular
  • C-Frame, VPAT, hydraulic cylinders and lines
  • Lockable engine enclosures
  • Front pull device
  • Rigid drawbar
  • Ecology drains (engine, power train and implement oil and engine coolant)
  • Scheduled oil sampling ports (engine, power train implement oil)
  • Vandalism protection
  • Heavy duty crankcase guard

ANTIFREEZE

  • Extended life coolant, –37° C (–35° F)

Optional Equipment

ELECTRICAL

  • Integrated four front halogen lights, two rear halogen lights

POWER TRAIN

  • Drive, auxiliary
  • Installation, winch

UNDERCARRIAGE

  • Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
  • Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne

OPERATOR STATION

  • Cab with air conditioning*
  • Cab, polycarbonate windows and air conditioning*
  • Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
  • Radio, AM/FM, Bluetooth
  • Sound suppression
  • *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

HYDRAULICS

  • Hydraulics, 4 valve for use with ripper
  • Hydraulics, 4 valve for use with winch

GUARDS

  • Guard, rear, heavy duty
  • Grill, radiator, heavy duty
  • Guard, track guiding, center
  • Guard, track roller, full length
  • Screen, rear, cab
  • Screen, side, cab
  • Screen, rear, canopy
  • Screen, front and doors, canopy
  • Sweeps, front
  • Sweeps, rear

BLADES

  • VPAT XL blade
  • VPAT LGP blade
  • VPAT Intermediate blade

REAR ATTACHMENTS

  • Drawbar, towing
  • Mounting, winch
  • Ripper, parallelogram, includes three shanks and teeth

REAR ATTACHMENT CONTROL

  • Control, ripper
  • Control, winch
  • Control, ripper and winch

MACHINE CONTROL AND GUIDANCE

  • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
  • Power Pitch blade control

STARTING AIDS

  • Heater, engine, coolant, 120 volt
  • Starting aid, ether

OTHER ATTACHMENTS

  • Machine Security System

ANTIFREEZE

  • Extended life coolant, –50° C (–58° F)

FIELD INSTALLED ATTACHMENT

  • Winch, hydrostatic