336 Excavator

  • Specs Summary

G3516C Gas Generator Set

From natural gas-fueled combined heat and power (CHP) systems and emergency power for facilities, to renewable biogas energy to support the local grid, or electricity generated from coal mine gases, Caterpillar has a wide range of reliable gas power solutions.

Standard Equipment

Air Inlet

  • Two-element single-stage air cleaner with enclosure and service indicator

Control Panel

  • EMCP 4.3

Cooling

  • Engine driven water pumps for jacket water and aftercooler
  • Jacket water and SCAC driven pumps and bypass lines
  • Jacket water and SCAC thermostat and outlet--ANSI 6 in/DN150
  • 2nd Stage SCAC-Cat Flange
  • ANSI Class 6 in/DN customer flange connections for JW inlet and outlet

Exhaust

  • Dry exhaust manifolds, insulated and shielded
  • Cat-flanged face outlet on turbocharger
  • Provides exhaust port temperatures and stack temperature to customer supplied screen via CCM
  • Integrated Sensing Module (ISM)

Fuel System

  • Throttle plate, 24V DC actuator, controlled by ECM
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
  • Engine installed, fuel metering valve
  • 24V ETR Gas Shutoff Valve
  • Fuel Filter

Ignition System

  • Electronic Ignition System (controlled by ECM) 
  • Individual Cylinder Detonation Sensitive Timing (DST) 

Generator

  • SR4B
  • 3-phase brushless, salient pole
  • Permanent Magnet Excitation
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVARIPF control
  • Class H Insulation & Class F temperature rise
  • Anti-condensation space heater
  • Bus bar connections
  • Reactive Droop
  • Winding temperature detectors

General

  • Crankshaft Vibration Damper and Guard
  • Operation and maintenance manuals
  • RH Service
  • Parts Book

Optional Equipment

Air Inlet

  • Enclosure mounting brackets and piping
  • Air cleaner with precleaner
  • Vertical, horizontal dual element air cleaner

Control Panel

  • Local NFPA99-110 Alarm Module w/LEDs
  • Custom 8-Light Alarm Module
  • Synchronizing Module
  • Engine Failure Relay
  • PL1000E/PL1000T Communications Module
  • Remote 24V 8/16 Light Annunciator

Cooling

  • Aftercooler air lines, aftercooler core replacement
  • Jacket water coolant heater
  • Engine Pumps
  • Inlet/Outlet connections
  • Cat Flange, ANS/DIN Adapter Flange

Exhaust

  • 406 mm flange kits
  • 356-406mm Flange and Exhaust Expander
  • 14" Flange Kit
  • 406 mm Elbow Kits
  • Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
  • Flexible Fittings
  • 15/18/25 dBA Muffler Attenuation
  • 16" Spark Arresting Muffler

Fuel System

  • 14-69 kPa (2-10 psi) gas pressure regulator
  • 207-276kPa, 30-40 psi gas knockdown regulator
  • Fuel Filter, Gas Filter
  • 24VDC Gas Shutoff Valve, Gas Knockdown Regulator

Generator

  • Low voltage extension box
  • Cable access box
  • Bearing temperature detectors
  • Generator air filter
  • Medium and high voltage generators and attachment
  • 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)
  • Annunciator Modules
  • 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)
  • 480/4160/13200 Volt Generator Options (60 Hz)
  • Generator Removal
  • European Bus Bars

Governing System

  • Load share module

General

  • Barring group
  • US AID Emblem
  • Special paint order
  • Tool set
  • Digital diagnostic tool

Starting/Charging

  • Battery with cables and rack (shipped loose)
  • Jacket water coolant heater
  • 60A, 24V charging alternator (requires engine driven pumps)
  • Battery disconnect switch
  • 20A battery charger
  • Battery removal