336 Excavator

  • Specs Summary

Gas Generator G3516H

From natural gas-fueled combined heat and power (CHP) systems and emergency power for facilities, to renewable biogas energy to support the local grid, or electricity generated from coal mine gases, Caterpillar has a wide range of reliable gas power solutions.

Standard Equipment

Control Panels

  • EMCP4.3

Air Inlet

  • Two-element single-stage air cleaner with enclosure and service indicator
  • Package Mounted Air Cleaner with service indicator
  • Package Mounted Air Cleaner with service indicator

Circuit Breakers

  • 4000A, 3-Pole UL Rated
  • 4000A, 3-Pole IEC Rated

Cooling

  • Engine driven water pumps for jacket water and after cooler
  • Jacket water and SCAC driven pumps
  • Jacket water and SCAC driven thermostats
  • 2nd stage SCAC-Cat Flange
  • ANSI Class 150/DN custom flange connections for JW inlet and outlet

Exhaust

  • Dry exhaust manifolds, insulated and shielded
  • Cat-flanged face outlet on turbocharger
  • Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns

Fuel System

  • Throttle plate, 24V DC actuator, controlled by GECM
  • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
  • Electronic fuel metering valve

Ignition System

  • Electronic Ignition System (controlled by ADEM A4) 
  • Individual Cylinder Detonation Sensitive Timing (DST) 

Generator

  • SR5
  • Permanent Magnet Excitiation
  • Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
  • Anti-condensation space heater
  • Reactive Droop
  • Winding temperature detectors

General

  • Paint- Caterpillar Yellow except rails and radiators gloss black 
  • “Stationary Use Only” Label in Correspondence with EPA Nonroad Mobile SI rule 
  • Crankshaft vibration damper and guard
  • Operation and maintenance manuals
  • RH Service
  • Parts book

Governing System

  • ADEM A4 4-20mA (0-5V) Speed Input 

Optional Equipment

Air Inlet

  • Heavy Duty air cleaner with precleaner
  • Mounting brackets and piping
  • Air cleaner with precleaner

Circuit Breakers

  • Frame Mounting
  • Lower & Upper Covers, Extension Box Roof Cover
  • Bus Bar Mounting
  • No UV trip or package mounted CB Wiring
  • MP-Frame 3 Pole Bottom Cable Entry or MP- Frame 6 Pole Bottom Cable Entry   
  • 2500/3000/3200A or 4000/5000A Neutral Current Transformer Automatic Selection 

Control Panels

  • Remote monitoring software
  • Local alarm module
  • Synchronizing module
  • Remote Monitoring & Control
  • Cross-Current Compensation Current Transformer-- 8.7/15 kV Classes
  • Cat Connect: Ehternet, Satellite, Cell Telematics
  • Local/Remote PC Monitorring 
  • RTD Module
  • Remote RS485, 32-light Annunciator
  • 16 Point/32 Light Annunciator with NFPA99-110/CSA282 Configuration
  • Discrete I/O Module, 12 Digital Inputs, 8 'Form C' Relay

Cooling

  • Jacket water coolant heater
  • Engine pumps
  • Inlet/Outlet connections

Exhaust

  • Flange
  • Elbow
  • Muffler and spark-arresting muffler with ANSI companion flanges

Generator

  • Low voltage extension box
  • Cable access box
  • Bearing temperature detectors
  • Generator air filter
  • Medium and high voltage generators and attachment
  • Manual voltage control

Starting/Charging

  • 24V starting motors

General

  • US AID emblem
  • Special paint order
  • Tool set
  • Digital diagnostic tool
  • Battery with cables and rack (shipped loose)
  • Jacket water heater
  • 60A, 24V charging alternator (requires engine driven pumps)
  • Battery diconnect switch