Specifications
Weights - Approximate
- Nominal Rated Payload
- 360ton (US)
- Rated Gross Machine Weight
- 1270000lb
- Chassis Weight
- 448415lb
- Body Weight Range
- 38 833 – 42 907 kg (85,611 – 94,594 lb)
- Note (1)
- Consult your tire manufacturer for maximum tire load.
- Note (2)
- Chassis weight with full fuel and fluids, standard & mandatory attachments, hoist, body mounting group, rims, and tires.
- Note (3)
- Refer to Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations
Engine
- Gross Power - SAE J1995
- 3500hp
- Engine Model
- Cat® C175-16
- Net Power - SAE J1349
- 3405hp
- Rated Speed
- 1800r/min
- Emissions Rating
- Fuel Optimized
- Bore
- 6.9in
- Stroke
- 8.7in
- Displacement
- 5187in³
- Note (1)
- Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator.
- Note (2)
- U.S. EPA Tier 4 Final / EU Stage V available for applicable markets.
- Note (3)
- Additional fuel optimized selectable power ratings: 2312 kW / 3,100 hp
Service Refill Capacities
- Fuel Tank
- 1300gal (US)
- Fuel Tank (Tier 4)
- 1200gal (US)
- Diesel Exhaust Fluid Tank
- 100gal (US)
- Cooling System
- 211gal (US)
- Crankcase
- 82gal (US)
- Front Wheels - Each
- 7gal (US)
- Final Drive - Each
- 67gal (US)
- Hydraulic Tank
- 296gal (US)
- Hydraulic System - Including Tank
- 385gal (US)
- Grease Tank
- 90lb
- Note (1)
- DEF Tank only available for U.S. EPA Tier 4 Final / EU Stage V engine option
Steering
- Steer Angle
- 39°
- Turning Diameter - Front
- 106.3ft
- Steering Standards
- Steering Standards: ISO 5010:2007
- Note
- Turning Diameter (ISO 7457:1997)
Braking System
- Service Brakes
- Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated
- Front Wet Disc Brake Surface Area
- 20378in²
- Rear - Wet Disc Brake Surface Area
- 30750in²
- Standards
- Service and Secondary: ISO 3450:2011
- Parking Brake
- Four-corner, Multi-disc, Spring Applied, Hydraulically Released
- Load Brake
- Rear service brakes
- Dynamic Retarding Power - Continuous
- 5480hp
- Note
- Anti-Lock Brake System (ABS) optional with CMD package
AC Drive System
- Total Reduction Ratio
- 35:01:00
- Top Speed - Loaded
- 40mile/h
- Generator/Alternator
- Cat brushless, engine mounted, dual bearing
- Controls
- Cat IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
- Wheel Motor
- Cat AC induction, rear axle mounted
- Cooling System
- Cat variable speed, hydraulically driven cooling system
Capacity - HE Body - 100% fill factor
- Struck
- 97-153 m³ (127-200 yd³)
- Heaped (SAE 2:1)
- 186-237 m³ (243-310 yd³)
- Note
- Consult your local Cat dealer for body recommendations.
Body Hoists
- Type
- Twin, two-stage hydraulic cylinders with snubbing valve.
- Pump Flow - High Idle
- 257.3gal/min
- Relief Valve Setting - Raise
- 3029psi
- Body Raise Time - High Idle
- 21s
- Body Lower Time - Float
- 22s
- Body Power Down- High Idle
- 17.5s
- Note (1)
- Twin, two-stage hydraulic cylinders mounted outside main frame; double-acting cylinders in both stages.
- Note (2)
- Power raise in both stages; power down capability in both stages.
- Note (3)
- Automatic body-lower modulation reduces impact on frame.
Suspension
- Type
- Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top & bottom double shear clevis attachments
- Effective Cylinder Stroke - Front
- 4in
- Effective Cylinder Stroke - Rear
- 2in
- Rear axle - Oscillation
- +/- 5.32 degrees
Cab
- Air Conditioning
- HFC - 134A refrigerant: 21,600 Btu/h
- Heater / Defroster
- 24600Btu/h
- Note
- Ambient capabilities down to -15C (5F) for heater/defroster and up to 50C (122F) for air conditioning.
- ROPS Standards (1)
- ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
- FOPS Standards
- FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.
Sound
- Sound Standards
- The operator sound pressure level, 75 dB(A), measured according to ISO 6394:2008 and ISO 6396:2008.
Weight Distributions - Approximate
- Front Axle - Empty
- 47%
- Rear Axle - Empty
- 53%
- Front Axle - Loaded
- 33%
- Rear Axle - Loaded
- 67%
- Note
- Weight distributions optimized with Cat body.
Tires
- Standard Tires
- 59/80 R63
- Rims
- 44" x 63"
- Note (1)
- Quick Change Rims optional.
- Note (2)
- Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.
Dimensions (Approximate)
- Height - Top of ROPS
- 22.05ft
- Overall Length
- 51.44ft
- Wheel Base
- 21.9ft
- Rear Axle - Tail
- 16.07ft
- Dump Clearance - Empty
- 5.72ft
- Loading Height - Empty
- 23.85ft
- Overall Height - Body Raised
- 48.85ft
- Centerline Front Tire Width
- 23.06ft
- Front Axle Clearance - Loaded
- 2.81ft
- Overall Canopy Width (with rock deflectors)
- 33.15ft
- Outside Body/Canopy Width (without rock deflectors)
- 31.62ft
- Inside Body Width
- 29.44ft
- Front Canopy Height - Empty
- 26.01ft
- Rear Axle Clearance - Loaded
- 2.8ft
- Centerline of Rear Dual Tire Width
- 19.5ft
- Overall Tire Width - Empty
- 30.27ft
- Note
- Dimensions listed includes canopy deflectors