Cat?� 3516C Industrial Diesel Engine | N C Machinery

Photos
360 Views

The Cat?� 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

PRINT
SHARE

Specifications

Power Rating

Maximum Power: 2100hp
Maximum Torque: 7563lb-ft @ 1300 rpm
Rated Speed: 1750 rpm
Minimum Power: 2100hp

Emission Standards

Emissions: U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

Engine Dimensions - Approximate

Length: 129.1in
Width: 60.2in
Height: 81.2in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments: 17284lb

General

Engine Configuration: V-16, 4-Stroke-Cycle Diesel
Bore: 6.7in
Stroke: 8.5in
Displacement: 4760in³
Compression Ratio: 14.7:1
Aspiration: Turbocharged Aftercooled
Rotation from Flywheel End: Counterclockwise
Aftertreatment: -

Standard/Optional Features

Standard Equipment:

Air Inlet System
- Air to Air Aftercooled (ATAAC)
- Four turbochargers, center mounted
Control System
- ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
Cooling System
- Thermostats and housing
- Gear driven centrifugal jacket water pump
- Connections for radiator cooling
Exhaust System
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
- Two exhaust outlets, 203 mm (8 in) round flange
Flywheels And Flywheel Housing
- SAE No. 00 flywheel (183 teeth)
- SAE No. 00 flywheel housing
Fuel System
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
Instrumentation
- No standard instrument or gauge panel
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
Mounting System
- Trunnion front support
Power Take Off
- Front housing, two-sided
Protection System
- ADEM A4 ECM monitoring system to provide customer programmable engine
- Deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40 pin customer interface connection
Starting System
- Dual 24V electric starting motor, LH, unwired
General
- Paint: Caterpillar yellow
- Vibration damper
- Lifting eyes

Optional Equipment:

Contact N C Machinery today for all of your equipment needs!

Contact Us