Specifications
Engine
- Engine Model
- Cat® C15
- Engine Power - Tier 3 Engine - ISO 14396:2002
- 401hp
- Engine Power - VR Engine - ISO 14396:2002
- 401hp
- Bore
- 5.4in
- Stroke
- 6.8in
- Displacement
- 928in³
- Note (1)
- Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
- Note (2)
- All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
- Note (3)
- Engine derate will commence at an altitude of 2743 m (8,999 ft).
- Note (4)
-
Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. - Note (5)
- Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Operating Specifications
- Nominal Payload Capacity
- 66139lb
- Gross Machine Mass
- 132300lb
- Body Capacities
- 11.3-17.5 m³ (14.8-22.9 yd³)
Body Capacities
- Body 1
- 14.8yd³
- Body 2 - Standard Body
- 18.8yd³
- Body 3
- 22.9yd³
- Wide Body
- 21.9yd³
- Ejector Body (1)
- 19.9yd³
- Ejector Body (2)
- 21.9yd³
- Note
- Heaped SAE 2:1.
Weight Distribution
- Empty - Front Axle
- 67.50%
- Empty - Rear Axle
- 32.50%
- Loaded - Front Axle
- 44.20%
- Loaded - Rear Axle
- 55.80%
Weights
- Empty
- 63647lb
- Empty - Front Axle
- 42944lb
- Empty - Rear Axle
- 20704lb
- Loaded
- 132277lb
- Loaded - Front Axle
- 58451lb
- Loaded - Rear Axle
- 73826lb
Body Hoist
- Raise
- 10.5s
- Lower
- 11.2s
- Total Cycle Time
- 21.7s
Turning Dimensions
- Outside Clearance Radius
- 337.4in
- Inner Clearance Radius
- 198in
- Articulation Angle
- 42.5°
- Frame Oscillation
- 10 Degrees
Transmission
- Forward - 1
- 3.9mile/h
- Forward - 2
- 7mile/h
- Forward - 3
- 12.9mile/h
- Forward - 4
- 22.8mile/h
- Reverse - 1
- 4.4mile/h
- Note
- Maximum travel speeds with standard 26.5 × R25 tires.
Service Refill Capacities
- Engine Crankcase - With Filter
- 9gal (US)
- Transmission
- 18gal (US)
- Hydraulic Tank
- 38gal (US)
- Cooling System
- 20gal (US)
- Front Differential and Final Drives
- 15gal (US)
- Rear Differential and Final Drives
- 15gal (US)
- Fuel Tank
- 108gal (US)
Tires
- Tire Size
- 26.5 × R25
Final Drives
- Differential Ratio
- 3.38:1
- Final Drive Ratio
- 4.76:1
- Total Reduction Ratio
- 16.13:1
- Note
- Fully floating axles.
Standards
- Standards
- ROPS/FOPS Certified Cab