Specifications
Engine
- Engine Model
- Cat® C18
- Engine Power - EU Stage V Engine - ISO 14396:2002
- 598hp
- Engine Power - Tier 3 Engine - ISO 14396:2002
- 581hp
- Engine Power - VR Engine - ISO 14396:2002
- 581hp
- Bore
- 5.7in
- Stroke
- 7.2in
- Displacement
- 1104.53in³
- Note (1)
- Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
- Note (2)
- All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
- Note (3)
- Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
- Note (4)
- Optional Ventilation Reduction Package available.
- Note (5)
- Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
- Note (6)
- Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note (7)
- *<5 %
Operating Specifications
- Nominal Payload Capacity
- 99208lb
- Gross Machine Mass
- 196765lb
- Shipping Mass (Stage V Engine Model)
- 96225lb
- Shipping Mass (Other Engine Models)
- 94415lb
- Body Capacities
- 18.0-25.1 m³ (23.5-32.8 yd³)
Weights (Stage V Engine Model)
- Operating Mass
- 91285lb
- Operating Mass - Front Axle
- 64565lb
- Operating Mass - Rear Axle
- 26720lb
- Operating Mass + Rated Payload
- 190495lb
- Operating Mass + Rated Payload - Front Axle
- 89235lb
- Operating Mass + Rated Payload - Rear Axle
- 101260lb
Weights (Other Engine Models)
- Operating Mass
- 88320lb
- Operating Mass - Front Axle
- 61225lb
- Operating Mass - Rear Axle
- 27095lb
- Operating Mass + Rated Payload
- 187530lb
- Operating Mass + Rated Payload - Front Axle
- 85355lb
- Operating Mass + Rated Payload - Rear Axle
- 102175lb
Weight Distribution (Stage V Engine Model)
- Empty - Front Axle
- 70.7%
- Empty - Rear Axle
- 29.3%
- Loaded - Front Axle
- 46.8%
- Loaded - Rear Axle
- 53.2%
Weight Distribution (Other Engine Models)
- Empty - Front Axle
- 69.3%
- Empty - Rear Axle
- 30.7%
- Loaded - Front Axle
- 45.5%
- Loaded - Rear Axle
- 54.5%
Body Hoist (Stage V Engine Model)
- Raise
- 15 Seconds
- Lower
- 21 Seconds
- Total Cycle Time
- 36 Seconds
Body Hoist (Other Engine Models)
- Raise
- 14 Seconds
- Lower
- 21 Seconds
- Total Cycle Time
- 35 Seconds
Body Capacities
- Dump Body - 1
- 23.6yd³
- Dump Body - 2 - Standard
- 27.9yd³
- Dump Body - 3
- 32.8yd³
- Ejector Body
- 29.9yd³
- Note
- Heaped SAE 2:1.
Turning Dimensions
- Outside Clearance Radius*
- 371in
- Inside Clearance Radius*
- 209in
- Frame Oscillation
- 10°
- Articulation Angle
- 42.5°
- Note
- *Clearance dimensions are for reference only.
Transmission
- Forward - 1
- 4.4mile/h
- Forward - 2
- 5.9mile/h
- Forward - 3
- 8mile/h
- Forward - 4
- 10.8mile/h
- Forward - 5
- 14.6mile/h
- Forward - 6
- 19.7mile/h
- Forward - 7
- 26.4mile/h
- Reverse - 1
- 4.2mile/h
- Reverse - 2
- 5.6mile/h
- Note
- Maximum travel speeds with standard 29.5 × R29 tires.
Service Refill Capacities
- Engine Crankcase - With Filter
- 16.9gal (US)
- Transmission
- 15.9gal (US)
- Hydraulic Tank
- 70.3gal (US)
- Cooling System
- 22.5gal (US)
- Front Differential and Final Drives
- 20.3gal (US)
- Rear Differential and Final Drives
- 21.9gal (US)
- Fuel Tank
- 201.8gal (US)
Tires
- Tire Size
- 29.5 × R29
Standards
- Standards
- ROPS/FOPS Certified Cab
Final Drives
- Differential Ratio
- 3.46:1
- Final Drive Ratio
- 5.65:1
- Total Reduction Ratio
- 19.55:1