Specifications
Engine
- Engine Model
- Cat® C32B
- Gross Power - SAE J1995
- 1025hp
- Engine Speed
- 1800r/min
- Net Power - SAE J1349
- 916hp
- Emissions
- Fuel Optimized
- Cylinders
- 12
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1959in³
- Note (1)
- Net Power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 1,800 rpm.
- Note (2)
- Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
- Note (3)
- Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Note (4)
- No engine derating required up to 2286 m (7,500 ft) for Tier 4/Stage V.
- Note (5)
- Available as Tier 4 Final/Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards.
Tank Configurations
- Water Tank Capacity
- up to 75 700 L (20,000 gal)
- Note
- Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 - 75 700 L (19,900 - 20,000 gal)
- Machine Weight (with water tank full)
- 327,964 - 327,964 lb / 147 172 - 148 762 kg
- Empty Machine Operating Weight (without water / with fuel)
- 160,307 - 162,323 lb / 72 714 - 73 629 kg
- Water Tank - Max Empty Weight (no WDS)
- 42,983 - 44,092 lb / 19 497 - 20 000 kg
- Note (1)
- Cat branded tanks include additional features and options commonly selected by customers in the industry. Splash guards, fill chute, and rock ejectors are standard.
- Note (2)
- Hoist cylinder mounting on all tank offerings enhances serviceability.
Operating Specifications
- Top Speed - Loaded
- 41.7mile/h
- Note
- Water Tank Capacity Range: 69 700 - 75 700 L (18,400 - 20,000 gal)
- Note (2)
- Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.5-0.2 gal/ft² (3 mph - 25 mph)
Weights - Approximate
- Target Gross Machine Weight
- 363000lb
- Chassis Weight
- 115217lb
Braking System
- Brake Surface - Front
- 6331in²
- Brake Surface - Rear
- 15828in²
- Brake Standards
- ISO 3450:2011
Body Hoists
- Pump Flow - High Idle
- 6331gal/min
- Relief Valve Setting - Raise
- 2750psi
- Relief Valve Setting - Lower
- 500psi
- Body Raise Time - High Idle
- 15s
- Body Lower Time - Float
- 13s
- Body Lower Time - High Idle
- 13s
Suspension
- Empty Loaded Cylinder Stroke Front
- 2.9in
- Empty Loaded Cylinder Stroke Rear
- 2.5in
- Rear axle - Oscillation
- 5.4°
Steering
- Steering Standards
- ISO 5010:2007
- Steer Angle
- 30.5°
- Turning Diameter - Front
- 83ft
- Turning Circle - Clearance Diameter
- 93ft
Tires
- Standard Tire
- 27.00R49 (E4)
- Note (1)
- Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
- Note (2)
- Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Service Refill Capacities
- Fuel Tank (1)
- 300gal (US)
- Fuel Tank (2)
- 350gal (US)
- Cooling System
- 63.4gal (US)
- Crankcase
- 28.7gal (US)
- Differentials
- 59.9gal (US)
- Final Drive - Each
- 20gal (US)
- Steering System - Including Tank
- 14.1gal (US)
- Brake Hoist System
- 85gal (US)
- Torque Converter - Transmission System
- 36.5gal (US)
Cab
- Air Conditioning
- 18390Btu/lb
- Heater / Defroster
- 43930Btu
- ROPS Standards (1)
- Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- FOPS Standards
- Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
- Note (1)
- The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t
- Note (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A).
- Note (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Cat Water Delivery System (WDS)
- Maximum water flow
- 1800gal(US)/min
- Water per spray head (minimum)
- 35gal(US)/min
- Water per spray head (maximum)
- 600gal(US)/min
- Spray head opening range (minimum)
- 0.04in
- Spray head opening range (maximum)
- 0.75in
- Maximum size debris flushed through spray head
- 0.75in
- Spray system hydraulic tank capacity
- 7.25gal (US)
- Maximum number of rear spray heads
- 5
- Minimum number of rear spray heads (recommended 3)
- 2
- Minimum number of front/side spray heads
- 2
- Maximum number of front/side spray heads
- 0
- Maximum water from cannon (idle)
- 600gal(US)/min
- Maximum water from cannon (high idle)
- 1650gal(US)/min
- Maximum cannon spray distance
- 200ft
- Type
- Wet water pump/hydraulic motor coupling
- Note
- Operator selectable coverage: 0.1 - 0.8 L/m² (4 kph - 40 kph) / 0.05 - 0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration.
- Note (1)
- Spray head opening is automatically controlled by the system to achieve Auto Mode Coverage or manual mode flow rate.
- Note (2)
- The Auto Mode setting controls water coverage and automatically adjusts to the number of spray heads being used — independent of ground speed. This is an exclusive feature designed into the Cat WDS software to help water more efficiently. Water flow is co
- Note (3)
- Alternatively, manual mode allows the operator to set a water flow rate that is constant regardless of ground speed. This mode is not recommended for daily operation and will reduce watering efficiency and may increase fuel usage.
- Note (4)
- Spray heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray.
- Note (5)
- Cannon performance depends on nozzle orifice and pipe size.
Weight Distributions - Approximate
- Front Axle - Empty
- 46%
- Front Axle - Loaded
- 33%
- Rear Axle - Empty
- 54%
- Rear Axle - Loaded
- 67%
Transmission
- Forward - 1
- 6.6mile/h
- Forward - 2
- 9.1mile/h
- Forward - 3
- 11.9mile/h
- Forward - 4
- 16.6mile/h
- Forward - 5
- 22.5mile/h
- Forward - 6
- 30.2mile/h
- Forward - 7
- 40.9mile/h
- Reverse
- 7.5mile/h
- Note
- Maximum travel speeds with standard 27.00R49 (E4) tires.
Final Drives
- Differential Ratio
- 2.736:1
- Planetary Ratio
- 7.0:1
- Total Reduction Ratio
- 19.1576:1
