Specifications
Engine
- Engine Model
- Cat® C15
- Net Power - SAE J1349:2011
- 405hp
- Net Power - ISO 9249:2007
- 405hp
- Rated Speed
- 1800r/min
- Engine Power - ISO 14396:2002
- 426hp
- Gross Power - SAE J1995:2014
- 434hp
- Peak Net Torque (1,300 rpm)
- 1479lbf·ft
- Torque Rise
- 33%
- Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V)
- 9298ft
- Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA)
- 9098ft
- Bore
- 5.4in
- Stroke
- 6.7in
- Displacement
- 927.6in³
- High Idle Speed
- 2300r/min
- Low Idle Speed
- 800r/min
- Note (1)
- Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
- Note (2)
- Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Specifications
- Operating Weight – Straight Blade (Tier 4 Final/Stage V)
- 74966lb
Transmission
- Transmission Type
- Cat planetary - powershift - ECPC
- Forward - 1
- 3.8mile/h
- Forward - 2
- 6.9mile/h
- Forward - 3
- 12.2mile/h
- Forward - 4
- 21.6mile/h
- Reverse - 1
- 4.3mile/h
- Reverse - 2
- 7.8mile/h
- Reverse - 3
- 13.9mile/h
- Reverse - 4
- 24.7mile/h
Hydraulic System - Lift/Tilt
- Pump Flow at 1,800 rpm
- 30.9gal/min
- Main Relief Pressure
- 3771psi
- Maximum Supply Pressure
- 3495psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 120 mm × 1070 mm (4.7 in × 42.1 in)
- Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
- 140 mm × 230 mm (5.5 in × 9.1 in)
Hydraulic System - Steering
- Steering System - Circuit
- Pilot operated, load sensing
- Bore
- 4.5in
- Stroke
- 22.7in
- Steering System - Pump
- Variable displacement piston
- Max Flow at 1,800 rpm
- 44.9gal/min
- Relief Valve Setting - Steering
- 3481psi
- Vehicle Articulation Angle
- 86°
Service Refill Capacities
- Cooling System
- 30.6gal (US)
- Engine Crankcase
- 9gal (US)
- Transmission
- 17.4gal (US)
- Fuel Tank
- 206.6gal (US)
- Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)
- 8.5gal (US)
- Differential - Final Drives - Front
- 26.4gal (US)
- Differential - Final Drives - Rear
- 29.1gal (US)
- Hydraulic Tank Only
- 35.4gal (US)
- Hydraulic System - Implement/Steering
- 56.5gal (US)
- Note (1)
- All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±11°
Braking System
- Parking Brake
- Drum and shoe, spring applied, hydraulic released
- Brakes
- Multi-disc wet (enclosed) 4 WHL
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)**
- 110dB(A)
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
- Note (2)
- ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
- Note (3)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (5)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Pressure Level (ISO 6396:2008)
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)**
- 110dB(A)
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
- Note (2)
- ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
- Note (3)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (5)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate)
- Height to Top of Beacon
- 14.5ft
- Height - Top of Exhaust Stack
- 14.2ft
- Height - Top of Hood
- 10.5ft
- Ground Clearance - Bumper
- 2.8ft
- Centerline of Rear Axle to Edge of Bumper
- 9.28ft
- Centerline of Front Axle to Hitch
- 6.1ft
- Wheel Base
- 12.1ft
- Length - With Blade on Ground - Straight Blade
- 27.6ft
- Ground Clearance to Trunnion
- 1.45ft
- Height - Top of Cab
- 13.5ft
- Width Over Guardrails
- 10.94ft
- Ground Clearance
- 1.8ft
Straight Blade
- Capacity
- 6.6yd³
- Width Over End Bits
- 177.4in
- Height
- 48.4in
- Dig Depth
- 17.6in
- Ground Clearance
- 41.6in
- Maximum Tilt
- 45.9in
- Turning Radius – Outside Corner of Blade
- 23.7ft
- Turning Radius – Inside Corner of Blade
- 10.15ft
Straight Push Plate Blade
- Capacity
- 6.6yd³
- Width Over End Bits
- 177.4in
- Height
- 48.4in
- Dig Depth
- 17.6in
- Ground Clearance
- 41.6in
- Maximum Tilt
- 45.9in
- Turning Radius – Outside Corner of Blade
- 23.2ft
- Turning Radius – Inside Corner of Blade
- 10.2in³
Semi-Universal Blade
- Capacity
- 10yd³
- Width Over End Bits
- 174.1in
- Height
- 61.1in
- Dig Depth
- 18.8in
- Ground Clearance
- 42in
- Maximum Tilt
- 44.1in
- Turning Radius – Outside Corner of Blade
- 23.8ft
- Turning Radius – Inside Corner of Blade
- 10.8ft
Universal Blade
- Capacity
- 10yd³
- Width Over End Bits
- 171.3in
- Height
- 53.1in
- Dig Depth
- 18.1in
- Ground Clearance
- 41.4in
- Maximum Tilt
- 44.6in
- Turning Radius – Outside Corner of Blade
- 23.9ft
- Turning Radius – Inside Corner of Blade
- 11.3ft
Coal Blade
- Capacity
- 21.2yd³
- Width Over End Bits
- 189in
- Height
- 68.7in
- Dig Depth
- 18.6in
- Ground Clearance
- 42.2in
- Maximum Tilt
- 48.9in
- Turning Radius – Outside Corner of Blade
- 24.9ft
- Turning Radius – Inside Corner of Blade
- 11.4ft
Extended Wear Blade
- Capacity
- 10.6yd³
- Width Over End Bits
- 171.6in
- Height
- 53.1in
- Dig Depth
- 18.1in
- Ground Clearance
- 41.4in
- Maximum Tilt
- 44.6in
- Turning Radius – Outside Corner of Blade
- 23.9ft
- Turning Radius – Inside Corner of Blade
- 11.4ft
