Specifications
Engine
- Net Power
- 814hp
- Engine Model
- Cat® C32B
- Emissions
- U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
- Rated Speed
- 1750 rpm
- Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard
- 900hp
- Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient
- 937hp
- Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard
- 907hp
- Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient
- 944hp
- Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard
- 884hp
- Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient
- 921hp
- Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard
- 893hp
- Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient
- 931hp
- Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard
- 814hp
- Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient
- 814hp
- Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard
- 823hp
- Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient
- 823hp
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1963.5in³
- Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm
- 3514ft·lbf
- Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm
- 3555ft·lbf
- Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm
- 3537ft·lbf
- Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm
- 3570ft·lbf
Operating Specifications
- Operating Weight
- 233430lb
- Rated Payload - Standard
- 25.5ton (US)
- Rated Payload - Standard (Material Handler)
- 30ton (US)
- Rated Payload - High Lift
- 22.5ton (US)
- Rated Payload - High Lift (Material Handler)
- 27ton (US)
- Bucket Capacity Range
- 11.5-24.5 m³ (15-32 yd³)
- Cat Truck Match - Standard
- 775/777
- Cat Truck Match - High Lift
- 785
Buckets
- Bucket Capacities
- 11.5-24.5 m³ (15-32 yd³)
Transmission
- Transmission Type
- Cat Planetary Powershift
- Forward - 1
- 4.3mile/h
- Forward - 2
- 7.4mile/h
- Forward - 3
- 12.7mile/h
- Direct Drive - Forward 1
- Disabled
- Direct Drive - Forward 2
- 8mile/h
- Direct Drive - Forward 3
- 14mile/h
- Reverse - 1
- 4.7mile/h
- Reverse - 2
- 8.1mile/h
- Reverse - 3
- 13.9mile/h
- Direct Drive - Reverse 1
- 5mile/h
- Direct Drive - Reverse 2
- 8.8mile/h
- Direct Drive - Reverse 3
- 15.3mile/h
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Positive Flow Control
- Lift/Tilt System - Pump
- Variable Displacement Piston
- Maximum Flow at 2,165 rpm
- 250gal/min
- Relief Valve Setting - Lift/Tilt
- 5000psi
- Lift Cylinder - Bore
- 9.3in
- Lift Cylinder - Stroke
- 63.5in
- Tilt Cylinder - Bore
- 11.5in
- Tilt Cylinder - Stroke
- 41.5in
Hydraulic Cycle Times
- Rack Back
- 2.3s
- Rack Back - High Lift
- 2.3s
- Raise
- 9s
- Raise - High Lift
- 9s
- Dump
- 2.6s
- Dump - High Lift
- 2.6s
- Float Down
- 3.2s
- Float Down - High Lift
- 3.2s
- Total Hydraulic Cycle Time
- 17.1s
Service Refill Capacities
- Fuel Tank
- 385.7gal (US)
- Cooling Systems
- 59.4gal (US)
- Crankcase
- 31.7gal (US)
- Transmission
- 51.5gal (US)
- Differential - Final Drives - Front
- 96.4gal (US)
- Differential - Final Drives - Rear
- 96.4gal (US)
- Hydraulic System Factory Fill (Implement)
- 104.1gal (US)
- Hydraulic Tank - Implement
- 60.2gal (US)
- Hydraulic Factory Fill (Steering)
- 32.5gal (US)
- Hydraulic Tank (Steering Tank Only)
- 26.3gal (US)
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±9°
Brakes
- Brakes
- ISO 3450:2011
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston, Variable Displacement
- Maximum Flow at 1,400-1,850 rpm
- 70gal/min
- Steering Cut Off Pressure
- 4500psi
- Total Steering Angle
- 80°
- Steering Cycle Times - Low Idle
- 4.9s
- Steering Cycle Times - High Idle
- 3.1s
Cooling System
- Ambient Capability Hydraulically Driven Demand Fan - Standard
- 109.4°F
- Ambient Capability, Hydraulically Driven Demand Fan - High
- 131°F
Sound Performance - Standard
- Note
- Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Sound Performance - Suppression
- Note
- Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Dimensions - Standard Lift - Approximate
- Ground to Top of Exhaust Stacks
- 17ft
- Ground to Top of ROPS
- 18.3ft
- Ground to Top of Hood
- 13.1ft
- Ground to Center of Front Axle
- 4.3ft
- Ground to Bumper Clearance
- 3.8ft
- Ground to Lower Hitch Clearance
- 2.2ft
- Reach - Maximum Lift
- 8.2ft
- Clearance at Maximum Lift
- 15.2ft
- B-Pin Height - Maximum Lift
- 22.8ft
- Maximum Overall Height - Bucket Raised
- 30.8ft
- Rear Axle - Centerline to Bumper
- 13.5ft
- Tread Width
- 10.83ft
- Rack Back Angle - Maximum Lift
- 56.9 degrees
- Dump Angle at Maximum Lift
- -49.5 degrees
- Rack Back Angle - Ground Level
- 40.2 degrees
- Width - Over Tires - With Bulge
- 14.74ft
- Rack Back Angle - Carry
- 48.9 degrees
- Wheel Base
- 19.3ft
- Maximum Overall Length
- 50.8ft
- Front Axle Centerline to Bucket Tip
- 18ft
Dimensions - High Lift - Approximate
- Tread Width
- 10.83ft
- Rack Back Angle - Ground Level
- 42.5 degrees
- Dump Angle at Maximum Lift
- -48.1 degrees
- Rack Back Angle - Maximum Lift
- 56.2 degrees
- Width - Over Tires - With Bulge
- 14.75ft
- Rack Back Angle - Carry
- 51.6 degrees
- Ground to Top of Exhaust Stacks
- 17ft
- Ground to Top of ROPS
- 18.3ft
- Ground to Top of Hood
- 13.1ft
- Ground to Center of Front Axle
- 4.3ft
- Ground to Bumper Clearance
- 3.8ft
- Ground to Lower Hitch Clearance
- 2.2ft
- Reach - Maximum Lift
- 7.6ft
- Clearance at Maximum Lift
- 17.2ft
- B-Pin Height - Maximum Lift
- 24.5ft
- Maximum Overall Height - Bucket Raised
- 32ft
- Rear Axle - Centerline to Bumper
- 13.5ft
- Wheel Base
- 19.3ft
- Maximum Overall Length
- 51.6ft
- Front Axle Centerline to Bucket Tip
- 18.8ft