Specifications
Engine
- Engine Power - ISO 14396:2002
- 786hp
- Engine Model
- Cat® C27
- Emissions
- Option 1 - U.S. EPA Tier 4 Final/EU Stage V
- Rated Speed
- 1800r/min
- Gross Power - SAE J1995:2014
- 801hp
- Net Power - SAE J1349:2011 - Standard Ambient
- 732hp
- Net Power - SAE J1349:2011 - High Ambient
- 681hp
- Emissions
- Option 2 - Emits equivalent to U.S. EPA Tier 2
- Rated Speed
- 1800 r/min
- Engine Power - ISO 14396:2002
- 752hp
- Gross Power - SAE J1995:2014
- 766hp
- Net Power - SAE J1349:2011 - Standard Ambient
- 699hp
- Net Power - SAE J1349:2011 - High Ambient
- 648hp
- Bore
- 5.4in
- Stroke
- 6in
- Displacement
- 1649.5in³
- Peak Torque - 1,200 rpm
- 2624lb/ft
- Torque Rise
- 18%
- Note
- Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Operating Specifications
- Operating Weight - Standard
- 178517lb
- Bucket Capacity Range
- 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
- Rated Payload - Standard
- 17.5ton (US)
- Rated Payload - High Lift
- 17.5ton (US)
- Cat Truck Match - Standard
- 773-775
- Cat Truck Match - High Lift
- 775-777
Transmission
- Transmission Type
- Cat planetary power shift
- Forward - 1
- 4.6mile/h
- Forward - 2
- 8.2mile/h
- Forward - 3
- 14.5mile/h
- Reverse - 1
- 5.1mile/h
- Reverse - 2
- 9.1mile/h
- Reverse - 3
- 16mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 8.2mile/h
- Direct Drive - Forward 3
- 14.5mile/h
- Direct Drive - Reverse 1
- 5.1mile/h
- Direct Drive - Reverse 2
- 9.1mile/h
- Direct Drive - Reverse 3
- 16mile/h
- Note
- Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Positive flow control
- Lift/Tilt System
- Variable displacement piston
- Maximum Flow at 1,800 rpm
- 240gal/min
- Relief Valve Setting - Lift/Tilt
- 4786psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 235 mm × 1287 mm (9.3 in × 50.7 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 292.1 mm × 820 mm (11.5 in × 32.3 in)
- Pilot System
- Open loop and pressure reducing
- Pilot Relief Setting
- 507psi
Hydraulic Cycle Times
- Rack Back
- 4.3s
- Raise
- 8.6s
- Dump
- 2.9s
- Lower
- 3.7s
- Lower Float Down
- 3.7s
- Total Hydraulic Cycle Time - Empty Bucket
- 13.8s
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Maximum Flow at 1,400 rpm
- 96.2gal/min
- Relief Valve Setting - Steering
- 5004psi
- Total Steering Angle
- 70°
Air Conditioning System
- Air Conditioning
- • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 8.5°
Brakes
- Brakes
- ISO 3450: 2011
Service Refill Capacities
- Fuel Tank
- 281gal (US)
- Cooling System
- 54.9gal (US)
- Engine Crankcase
- 20gal (US)
- Transmission
- 29.1gal (US)
- Differential - Final Drives - Front
- 71.6gal (US)
- Differential - Final Drives - Rear
- 68.9gal (US)
- Hydraulic System Factory Fill
- 210gal (US)
- Hydraulic Tank - Implement and Hydraulic Fan
- 68.9gal (US)
- Hydraulic Tank - Steering and Braking
- 34.9gal (US)
- Note
- Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 116dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 114dB(A)
- Note (1)
- *Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 116dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 114dB(A)
- Note (1)
- *Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
- Ground to Top of ROPS
- 17.2ft
- Ground to Top of Exhaust Stacks
- 16.6ft
- Ground to Top of Hood
- 12.7ft
- Ground to Bumper Clearance
- 3.5ft
- Rear Axle - Centerline to Bumper
- 12.5ft
- Front Axle Centerline to Bucket Tip
- 15.4ft
- Wheel Base
- 15.1ft
- Maximum Overall Length
- 42.9ft
- Ground to Lower Hitch Clearance
- 2ft
- Ground to Center of Front Axle
- 4.2ft
- Clearance at Maximum Lift
- 7.2ft
- Rack Back Angle at Ground Level
- 40.4°
- Rack Back Angle at Carry
- 48.8°
- B-Pin Height - Maximum Lift
- 19.7ft
- Maximum Overall Height - Bucket Raised
- 27.2ft
- Rack Angle at Maximum Lift
- 63.7°
- Dump Angle at Maximum Lift
- 45°
- Reach - Maximum Lift
- 7.2ft
- Note
- Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Dimensions (Approximate) - High Lift Linkage
- Ground to Top of ROPS
- 17.2ft
- Ground to Top of Exhaust Stacks
- 16.6ft
- Ground to Top of Hood
- 12.7ft
- Ground to Bumper Clearance
- 3.5ft
- Rear Axle - Centerline to Bumper
- 12.5ft
- Front Axle Centerline to Bucket Tip
- 17.8ft
- Wheel Base
- 15.1ft
- Maximum Overall Length
- 45.3ft
- Ground to Lower Hitch Clearance
- 2ft
- Ground to Center of Front Axle
- 4.2ft
- Clearance at Maximum Lift
- 14.8ft
- Rack Back Angle at Ground Level
- 39.9°
- Rack Back Angle at Carry
- 49.3°
- B-Pin Height - Maximum Lift
- 21.2ft
- Maximum Overall Height - Bucket Raised
- 28.7ft
- Rack Angle at Maximum Lift
- 60.6°
- Dump Angle at Maximum Lift
- 51°
- Reach - Maximum Lift
- 8.5ft
- Note
- Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
