Specifications
Engine
- Maximum Gross Power
- 168hp
- Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
- 601ft·lbf
- Stroke - Performance Power Mode: Range 1-4
- 5.3in
- Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
- 1800r/min
- Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
- 797N·m
- Displacement (Performance Power Mode: Speed Range 1-4)
- 428in³
- Emissions
- Engine meets U.S. EPA Tier 4 Final emission standards.
- Engine Model
- Cat® C7.1
- Note (4)
- No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
- Maximum Rated Gross Power - ISO 14396
- 168hp
- Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
- 170hp
- Note (2)
- **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
- Note (3)
- Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
- Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
- 168hp
- Note (1)
- *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
- Bore (Standard Power Mode: Range 1-4)
- 4.1in
- Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
- 156hp
- Stroke (Standard Power Mode: Range 1-3**)
- 5.3in
- Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
- 156hp
- Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
- 1600r/min
- Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 166hp
- Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 164hp
- Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
- 158hp
- Bore (Standard Power Mode: Range 1-3**)
- 4.1in
- Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
- 587ft·lbf
- Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
- 795N·m
- Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
- 776N·m
- Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 163hp
- Displacement (Standard Power Mode: Range 1-3**)
- 428in³
- Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
- 160hp
- Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
- 162hp
- Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
- 573ft·lbf
- Maximum Rated Gross Power - ISO 14396 (metric)
- 170mhp
Weights
- Operating Weight
- 31382lb
Buckets
- Bucket Capacities
- 2.1-5.0 m³ (2.7-6.5 yd³)
- Bucket Capacities - Light Material
- 3.1-5.0 m³ (4.0-6.5 yd³)
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level II
- Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
- 101dB(A)
- Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
- 68dB(A)
- Note (1)
- *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Dimensions with Bucket - High Lift
- Height - Overall**
- 18.7ft
- Reach - Bucket at 45°*
- 4.4ft
- Dump Angle at Full Lift
- 48°
- Width - Bucket
- 8.4ft
- Length - Wheel Base
- 9.8ft
- Width - Tread Center
- 6.3ft
- Length - Hitch to Front Axle
- 4.9ft
- Height - Ground to Axle Center**
- 2.25ft
- Note (1)
- *Vary with bucket.
- Clearance - Bucket at 45°*
- 10.7ft
- Height - Bucket Pin**
- 14.4ft
- Height - Ground to Beacon**
- 12.2ft
- Carry Height - Bucket Pin
- 1.9ft
- Clearance - Load over Height**
- 11.6ft
- Turning Radius - Outside of Tires
- 17.7ft
- Turning Radius - Over Bucket
- 20.6ft
- Rack Angle at Full Lift
- 51°
- Rack Angle at Carry
- 47°
- Length - Overall*
- 27ft
- Note (2)
- **Vary with tire.
- Height - Ground to Cab**
- 10.9ft
- Turning Radius - Inside of Tires
- 9.4ft
- Clearance - Level Bucket**
- 13.4ft
- Width - Over Tires
- 8.3ft
- Note (3)
- Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
- Dig Depth**
- 5.3in
- Articulation Angle
- 40°
- Operating Weight
- 31441lb
- Height - Ground Clearance**
- 1.3ft
- Length - Rear Axle to Bumper
- 6.5ft
- Departure Angle
- 33°
Dimensions with Bucket - Standard Lift
- Departure Angle
- 33°
- Length - Wheel Base
- 9.8ft
- Length - Rear Axle to Bumper
- 6.5ft
- Turning Radius - Over Bucket
- 19.5ft
- Carry Height - Bucket Pin
- 1.3ft
- Width - Over Tires
- 8.3ft
- Note (2)
- **Vary with tire.
- Dig Depth**
- 3.9in
- Turning Radius - Outside of Tires
- 17.7ft
- Clearance - Level Bucket**
- 11.75ft
- Clearance - Bucket at 45°*
- 9.1ft
- Rack Angle at Full Lift
- 54°
- Height - Overall**
- 17.1ft
- Width - Bucket
- 8.4ft
- Height - Ground to Axle Center**
- 2.25ft
- Height - Bucket Pin**
- 12.8ft
- Operating Weight
- 31125lb
- Width - Tread Center
- 6.3ft
- Turning Radius - Inside of Tires
- 9.4ft
- Reach - Bucket at 45°*
- 3.6ft
- Length - Overall*
- 24.9ft
- Clearance - Load over Height**
- 10.9ft
- Length - Hitch to Front Axle
- 4.9ft
- Height - Ground to Beacon**
- 12.2ft
- Articulation Angle
- 40°
- Height - Ground to Cab**
- 10.9ft
- Note (3)
- Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
- Note (1)
- *Vary with bucket.
- Dump Angle at Full Lift
- 48°
- Height - Ground Clearance**
- 1.3ft
- Rack Angle at Carry
- 43°
Steering
- Note (2)
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
- 3.5turns
- Maximum Flow - Steering Pump
- 34gal/min
- Steering Cylinder, Double Acting - Bore Diameter
- 2.8in
- Steering Cylinder, Double Acting - Stroke
- 17.2in
- Note (1)
- Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
- Maximum Working Pressure - Steering Pump
- 3500psi
- Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
- 2.8s
- Steering Articulation Angle - Each Direction
- 40°
- Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
- 2.4s
- Steering Cylinder, Double Acting - Rod Diameter
- 1.6in
Loader Hydraulic System
- Relief Pressure - Tilt Cylinder
- 4351psi
- Cycle Times - 1,600 rpm - Standard: Total Cycle Time
- 10.1s
- Maximum Flow - Implement Pump
- 50gal/min
- Maximum Flow - Implement Pump - 4th Function Maximum Flow*
- 42gal/min
- Note (2)
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
- 1.5s
- Note
- *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
- Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
- 9.3s
- Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
- 2.7s
- Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
- 5.1s
- Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
- 2.7s
- Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
- 4061psi
- Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
- 1.7s
- Maximum Working Pressure - Implement Pump
- 4061psi
- Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
- 4351psi
- Note (1)
- Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
- Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
- 5.7s
- Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
- 50gal/min
- Lift Cylinder: Standard Lift Linkage - Bore Diameter
- 4.3in
- Tilt Cylinder: Standard Lift Linkage - Stroke
- 21.9in
- Tilt Cylinder: Standard Lift Linkage - Rod Diameter
- 2.8in
- Lift Cylinder: Standard Lift Linkage - Rod Diameter
- 2.4in
- Tilt Cylinder: Standard Lift Linkage - Bore Diameter
- 5.1in
- Lift Cylinder: Standard Lift Linkage - Stroke
- 28.7in
Sustainability
- Recyclability
- 94%
Tires
- Standard Size
- 20.5 R25, radial (L-3)
- Note (2)
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
- Note (1)
- Other tire choices are available. Contact your Cat dealer for details.
- Other Choices Include
- 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Service Refill Capacities
- Transmission - Gear Box
- 2.2gal (US)
- Cooling System
- 7.9gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5gal (US)
- Fuel Tank
- 51.5gal (US)
- Axles - Rear
- 6.6gal (US)
- Hydraulic System - Including Tank
- 43.6gal (US)
- Engine Crankcase
- 5.3gal (US)
- Axles - Front
- 6.9gal (US)
- Hydraulic Tank
- 23.8gal (US)
Power Train
- Note
- *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
- Rear Axle
- Oscillating
- Note (2)
- Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
- Front Axle
- Fixed
- Front Axle - Traction Aid*
- Locking differential standard
- Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
- ± 10.5 degrees
- Brakes - Service
- Inboard wet disc
- Rear Axle - Traction Aid
- Limited slip differential optional
- Brakes - Parking
- Spring applied hydraulically released
- Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
- ± 7 degrees
Transmission
- Forward - Range 2
- 8mile/h
- Forward - Range 1*
- 1-13 km/h (0.6-8 mph)
- Reverse - Range 4
- 25mile/h
- Reverse - Range 2
- 8mile/h
- Note
- Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
- Forward - Range 3
- 17mile/h
- Forward - Range 4
- 25mile/h
- Reverse - Range 3
- 17mile/h
- Reverse - Range 1*
- 8mile/h
Operating Specifications
- Full Turn Tip Load
- 19424lb
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Axles
- Rear
- Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
- Front
- Fixed; Locking differential (standard)